SsangYong Korando III (2010 year). Manual — part 239
10-23
4890-00
7. CIRCUIT DIAGRAM
11-3
0000-00
1. SPECIFICATION
1) Specification of Active Wheel Sensor
Description
Specification
Supplying voltage
DC 12 V
Output current (at 2.75 km/h of vehicle speed)
7 mA (Lo) ~ 14 mA (Hi) +20%/-16%
Tightening torque
Front: 7.8 to 11.8 Nm
Rear: 7.8 to 11.8 Nm
Operating temperature
-40 ~ 150 ℃
Operating frequency
1 ~ 2,500 Hz
Unit
Description
ABS
ESP
HECU
Clock frequency: 32 MHz
Clock frequency: 50 MHz
Memory: 128 KB
Memory: 512 KB
Switch orifice
Switch orifice
Wheel speed sensor
Active type
Active type
Steering wheel angle
sensor
None
Max. detection angle speed:
1500 °/Sec
Operating voltage: 9 to 12 V
Sensor cluster
None
Yaw rate sensor + lateral G sensor +
longitudinal G sensor (4WD)
Longitudinal G sensor
4WD only
None
Pressure sensor
None
HECU integrated
11-4
2) Specification of Steering Wheel Angle Sensor
Description
Specification
Operating voltage
9 to 16 V
Maximum output current
10 mA
Maximum detection angle speed
±100°/Sec
Operating temperature
-30 to 75 ℃
Supplying voltage
9 to 16 V (battery voltage)
Output voltage (HI)
approx. 3.50 V (3.0 to 4.1 V)
Output voltage (LO)
approx. 1.50 V (1.3 to 2.0 V)
Pulses/rev
45 pulses/rev
3) Specification of Sensor Cluster
Description
Specification
Supplying voltage
approx. 12 V (8 to 16 V)
Current consumption
below 250 mA
-
Operating range
Yaw rate sensor
± 75 °/Sec
Lateral/longitudinal sensor
± 14.7m/Sec²
11-5
0000-00
2. MAJOR CHANGES
1) Steering Wheel Angle Sensor
SWAS (Steering Wheel Angle Sensor)
Old
New
The sensor has been changed due to newly adopted steering wheel heating system.
The location of sensor connector and the pin arrangement of connector have been changed.
1.
2.
Sensor connector
Sensor connector
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст