SsangYong Korando III (2010 year). Manual — part 184
06-23
8510-00
(1) Rear glass/outside mirror heated wire switch
Overview
▶
The rear glass/outside mirror heated wire is operated by BCM.
The heated wire operates for about 12 minutes when the switch is pressed with the engine started.
Press the switch again to stop the operation.
The output is "ON" only for 6 minutes when turning on the rear defogger switch within 10 minutes after
completion of output for 12 minutes. This can be done only once.
This function is available only when the engine is running.
Operation curve
▶
06-24
(2) Windshield heated wire switch
The windshield glass/outside mirror heated wire is operated by BCM.
The heated wire operates for about 12 minutes when the switch is pressed with the engine started.
Press the switch again to stop the operation.
The output is "ON" only for 6 minutes when turning on the rear defogger switch within 10 minutes after
completion of output for 12 minutes. This can be done only once.
This function is available only when the engine is running.
Operation curve
▶
06-25
8510-00
SVC class instrument cluster
TRIP A
TRIP B
(3) Trip switch
Whenever pressing this button, the information is displayed in the following order: Odometer, Trip A, Trip
B, Distance to empty, Average fuel consumption, Instant fuel consumption, Illumination level, Ambient air
temperature (for STD); Trip A, Trip B, Distance to empty, Average fuel consumption, Instant fuel
consumption, Illumination level, Ambient air temperature (for SVC). Press and hold (for more than 1 sec)
this button to initialize (reset) Trip A/Trip B and average fuel consumption, adjust illumination level or
change the unit of temperature.
Description
▶
The factory setting is DTE mode.
※
Display
Mode
Switch
Detecting
time
Function
Briefly
and hold
Below 1
second
(60 to
980 ms)
STD
- Mode change
(Odo→Trip A→Trip B→DTE
→Average fuel consumption→Instant fuel consumption
→Illumination level→Ambient air temperature)
SVC
- Mode change
(Trip A→Trip B→DTE→Average fuel consumption
→Instant fuel consumption→Illumination level
→Ambient air temperature)
Press
and hold
Over 1
seconds
- Reset
(Trip A, B, average fuel consumption)
- Change
(Illumination level (6 to 1), temperature unit (℃↔℉))
Not
press
Over 3
seconds
- Mode change
(Illumination level→Ambient air temperature→Odo)
STD class instrument cluster
TRIP A
TRIP B
06-26
Lower main panel switch
3) Lower Main Panel Switch
Rear fog lamp switch(EU ONLY)
Steering wheel heating switch
HLLD(Headlamp Leveling Device)
4WD LOCK switch
ESP OFF switch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст