SsangYong Korando III (2010 year). Manual — part 424

03-18

Operation of charge warning lamp

▶

ECU checks the generating voltage from alternator and circuit conditions and sends the warning lamp ON

signal to meter cluster through CAN line.

Basic control logic according to the driving conditions

▶

Engine ECU determines the engine loads according to the fuel injection volume and engine speed. It

charges the battery by increasing the generating voltage during deceleration. To improve the fuel

economy by reducing the alternator load during acceleration, engine ECU decreases the generating

voltage and consumes the battery voltage.

03-19

0000-00

3. CAN COMMUNICATION (Charge Warning Lamp)

Overview

▶

Meter cluster

(charge warning lamp)

The meter cluster receives the charge warning lamp ON signal from ECU through CAN line.

Charge warning lamp ON conditions

Pre-warning

When DTC related EEM set

Open or short circuit in alternator

-

-

-

Circuit diagram

▶

03-20

4. CIRCUIT DIAGRAM

01-3

0000-00

Turn signal lamp

Side repeater lamp

Puddle lamp

1. EXTERIOR LAMP SYSTEM LAYOUT

Headlamp (High beam)

Tail lamp, DRL (EU)*

Front fog light

Tail lamp

High-mounted

stop lamp

Stop lamp

License plate lamp

Turn signal lamp

Stop lamp,

Rear fog light (EU)

Reflector

Front view

Rear view

Headlamp (Low beam)

Back-up lamp