SsangYong Korando III (2010 year). Manual — part 516
11-24
Ensure that the connection or disconnection between the audio system and the USB memory/iPod
is carried out only when the engine is switched off. If the engine is switched on or off while the USB
memory is connected or disconnected, the USB memory may be damaged or not operate normally.
The audio system may not recognize some USB memory depending on the comparability or
condition. Check whether the USB memory operates normally in the vehicle before using it.
Take great care to ensure that the USB connection does not come in contact with the human body
or any object and the USB linking cable does not disturb a safe driving.
When you connect and disconnect the USB memory to the audio system several times in a short
periods, it may cause the USB memory to corrupt. If you particularly disconnect USB memory
during playback, it may be broken or operate incorrectly.
When you use the USB device for charging or heating by using the USB terminal on the audio
system, it may cause the system to deteriorate or fail.
iPod is a registered trademark of Apple Inc.
This audio system supports only the following iPod products: iPod Nano /iPod/iPod Touch/ iPhone.
This audio system may not support some iPod/iPhone products.
Always use the linking cable included with the iPod product when connecting it to the audio system.
The other cables may not be compatible and cause the audio system to fail.
In some cases, the iPod product may be damaged or not operate normally when the engine is
switched on while it is connected to the audio system. When not in use, always disconnect the iPod
product with the engine switched off.
When you use the iPod by connecting it to the audio system, the playback function and information
display may differ from original.
The iPod product can't be recharged using a iPod linking cable.
-
-
-
-
-
-
-
-
-
-
-
-
Cautions for using USB memory/iPod
01-3
0000-00
Wheel assembly changed
▶
Wheel Assembly
Old
16-inch Silver
17-inch Silver
18-inch Hyper silver
PN: 41730-34000
PN: 41730-34100
PN: 41730-34220
New
16-inch Silver
17-inch Silver
18-inch Diamond cutting
PN: 41730-34200
PN: 41730-34300
PN: 41730-34400
- 16, 17 and 18-inch wheel assembly design changed
(For 17-inch: existing 18-inch design used)
(For 18-inch: Hyper silver type → Diamond cutting type)
- Wheel offset and tire size same as before
1. MAJOR CHANGES
01-4
Newly added TPMS (Tire Pressure Monitoring System)
▶
TPMS related warning lamp
TPMS warning lamp
Global warning lamp
- TPMS warning lamp: Comes on if an error occurs in any component
related to the TPMS regardless of tire inflation pressure.
- Global warning lamp: Comes on when the tire pressure is low.
DOT LCD display window (supervision
type)
Displays current tire pressure and
abnormality.
01-5
0000-00
Wheel module
The wheel modules are mounted to each wheel rim and hole. They transmit
the signal of the pressure and temperature in tire, rotating direction and
wheel module ID code, etc. using the radio frequency to the TPMS ECU.
TPMS ECU
The TPMS ECU is located to the rear bumper rail under the vehicle. It outputs the tire pressure
and each wheel’s condition to the instrument cluster, based on the wheel module
information and CAN data.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст