SsangYong Korando III (2010 year). Manual — part 535
04-5
3190-01
2. TIGHTENING TORQUE
Part name
Tightening torque
Remark
1. Drive gear mounting bolt of differential carrier
166.6 to 176.4 Nm
10 EA
2. Reverse shaft mounting bolt
74.5 to 89.2 Nm
3. Transmission case mounting bolt
19.6 to 26.5 Nm
22 EA
4. Concentric slave cylinder mounting bolt
11.8 to 14.7 Nm
3 EA
5. Backup lamp switch
29.4 to 34.3 Nm
6. Neutral switch
29.4 to 34.3 Nm
7. Oil filler plug
58.8 to 78.4 Nm
8. Oil drain plug
58.8 to 78.4 Nm
9. Oil plug
58.8 to 78.4 Nm
10. Shift lever mounting nut
42.2 to 53.9 Nm
11. Selector lever mounting nut
42.2 to 53.9 Nm
12. Control shaft assembly mounting bolt
9.8 to 11.8 Nm
7 EA
13. Guide bolt
42.2 to 53.9 Nm
04-6
Front view
Rear view
1. OVERVIEW
This vehicle is equipped with WM6F1 M/T (Manual Transmission). This transmission is integrated with an
axle and designed to maximize the driving performance by optimizing the gear ratio according to the
engine torque.
WM6F1 M/T assembly
04-7
3190-01
1) Characteristics of WM6F1 M/T
Both Forward and Reverse gears use the helical gear and are made of high-strength material.
Drives the clutch with a concentric slave cylinder mounting bolt.
Shifting the transmission gears is performed through the remote control cable.
A pull type clutch is used for Reverse gear shifting.
Features triple/double/single synchronization.
-
-
-
-
-
Clutch housing
Transmission case
Input shaft
Concentric slave cylinder
Shift lever
Selector lever
Wiring bracket
Neutral switch
Backup lamp switch
Reverse idle shaft mounting bolt
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Control guide bolt
Oil filler plug (for servicing)
Oil drain plug
Oil filler plug (for manufacturing)
Air breather
Detent pin (for securing shift fork)
Oil seal (RH)
Oil seal (LH)
Control housing
11.
12.
13.
14.
15.
16.
17.
18.
19.
04-8
2) Internal Configuration
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст