SsangYong Korando III (2010 year). Manual — part 135
01-14
5. CAN COMMUNICATION CONFIGURATION
The CAN topology is linked with CAN communication system, which consists of P-CAN and B-CAN.
The instrument cluster and BCM (Body Control Module) communicate through both P-CAN and B-CAN
at the same time, and the SKM (SMART Key Module) communicates with the instrument cluster and
BCM through B-CAN.
1) CAN Configurations (P-CAN/B-CAN)
Abbreviations
Meaning
Function
GCU
Glow Control Unit
Glow control unit
EPS
Electronic Power Steering Unit
Electrically driven power steering unit
BCM
Body Control Module
Body control module
SKM
Smart Key Module
Smart key module
01-15
0000-00
2) CAN Communication Wiring Diagram
Splice pack
Wiring
Location
S101
Floor wiring (LH)
Under fuse and relay box in engine compartment
S102
Floor wiring (RH)
Inside of right fender
S201
Main wiring
Behind the instrument cluster (cowl cross member)
S202
Main wiring
Behind the instrument cluster (cowl cross member)
S205
Floor wiring (LH)
Bottom of driver seat (front right)
02-3
8410-00
1. CAUTIONS WHEN WORKING ON ELECTRICAL UNITS
Disconnect the negative cable from the battery
in advance when working on electrical units.
-
If a fuse is blown, replace it with a fuse which
has the correct amperage rating. If you use a
fuse with higher capacity than the
specification, the component can be
damaged or catch fire.
-
Do not drop or appy excessive impact to
sensors and relays.
-
80℃
10 A
15 A
Make sure to turn "OFF" the ignition switch
and other lamp switches before disconnecting
or connecting the negative battery cable.
(Otherwise, semiconductor parts can be
damaged.)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст