SsangYong Korando III (2010 year). Manual — part 476
05-36
Function
Signal
Remark
Display type
3 digits LCD
Display range
50 km ~ 999 km
(30 miles ~ 999 miles)
Resolution
1 km (mile)
Display interval
every 1 seconds
(1) DTE (Distance To Empty) Mode
The DTE (distance to empty) function is an estimation on how much further the vehicle can be driven with
the fuel remaining in the tank, based on the previous driving pattern (fuel economy).
7) Display Mode
STD Class Odometer Display & Data Storage
▶
<STD>
<SVC>
05-37
8010-01
Function
Signal
Remark
Display type
3 digits LCD
Display range 0.0 km ~ 99.9 km
(0 miles~99.9 miles)
Resolution
0.1 km (mile)
Display
interval
every 10 seconds
Data clear
- Disconnect B+
voltage
- Press and hold
Reset switch for
more than 1 sec.
- Reset automatically
when refilling
Standard type
- Drives at speed of 1 km/h or higher after refueling
- Press TRIP switch for more than 1 sec.
Supervision type
- To set reset ON/OFF when driving at speed of 1 km/h or higher after refueling
A) For auto reset
- Drive at speed of 1 km/h or higher after refueling
- Menu is not reset when pressing TRIP switch for more than 1 sec.
- Changed to manual setting when pressing TRIP switch for more than 5 sec.
B) For manual reset
- Menu is not reset when driving at speed or 1 km/h or higher after refueling
Menu is reset when pressing TRIP switch for more than 1 sec.
- Changed to automatic setting when pressing TRIP switch for more than 5 sec.
(2) Average Fuel Consumption Mode
The LCD display indicates average fuel consumption calculated based on total driving distance and total
fuel consumption since B+ power supply or data reset.
<STD>
<SVC>
05-38
When the ignition is switched on and the vehicle is drived more than 10 km, average fuel consumption
is displayed at every 200 ms, based on the fuel consumption and driving distance for 600 ms.
-
Function
Signal
Remark
Display type
DOT BAR TYPE(92DOT)
Display range
0.0 ~ 20(ℓ/100km, km/ℓ)/ 0.0 ~ 50(MPG)
Resolution
(DOT)
0.2174(ℓ/100km, km/ℓ per Bar),
0.5435(MPG per Bar)
Display interval
every 200ms(25℃)
<SVC>
(3) Instant Fuel Consumption Mode
The LCD display indicates the instant fuel consumption (for 2 seconds) calculated based on driving
distance and fuel consumption for last 2 seconds.
Function
Signal
Remark
Display type
3 digits LCD
Display range
0.0 ~ 99.9
(MPG, ℓ/100 km, km/ℓ)
Resolution
0.1 km (mile)
Display interval
every 2 seconds
<STD>
05-39
8010-01
SVC class instrument cluster
STD class instrument cluster
(4) Illumination Mode
TRIP/RESET switch
▶
Press for less than 1 second: change to next mode
Press for more than 1 second:
: Enter into illumination level mode
→ Level changes by 1 step up and down when pressing the switch for more than
1 second on consecutively illumination mode
(e.g. Level 4 → 5 → 6 → 5 → 4 → 3 → 2 → 1)
If the Trip/Reset switch is not pressed within 3 seconds after getting into the illumination mode, the
LCD changes to next mode.
-
-
-
<STD>
<SVC>
(5) TPMS mode
The TPMS (Tire Pressure Monitoring System) monitors each tire's status and warns a driver for
dangerous situations.
At initial start (more than 20 minutes have elapsed after ignition off), the tire pressure is not
determined. It can be displayed after 10 minutes of driving at speed of 20 km/h or higher.
-
-
Standard type
▶
Pressing the TRIP switch at the illumination brightness mode shows the items in the following order:
TPMS (front)->TPMS (rear).
Status
Operating conditions
Display
Tire pressure
display
At initial start (more than 20 minutes have
elapsed after ignition off), the tire pressure is
not determined. It can be displayed after 10
minutes of driving at speed of 20 km/h or
higher.
FR - display
RR - display
If the tire pressure is abnormal when it is not
detected, ‘--’ is displayed.
The standard type instrument cluster shows
only tire pressure and ‘--’.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст