SsangYong Korando III (2010 year). Manual — part 142
02-28
(3) Outside mirror folding relay
The power for the outside mirror folding relay is supplied through the fuse no. 45 in the engine
compartment CE box and the relay is operated by the operation signals from the no. D16 and no. D17 of
the BCM.
(4) IGN1, IGN2, ACC relays
Manual operation of BCM
▶
When pressing the outside mirror folding/unfolding switch with IGN ON, the mirrors are folded or
unfolded according to the previous mirror position. If the mirror is already folded, then the mirror will be
unfolded and vise versa. This operation will be performed for T1.
For models with SKM
▶
The power supplied through the AM1 fuse goes to the ACC relay no.1 and IGN1 relay no. 1. The power
supplied through the starter motor AM2 goes to the IGN2 relay no. 1. The IGN1 and IGN2 relays are
operated by the signals from the no. A1 and no. A2 of the SKM. Refer to SKM description for operating
conditions.
02-29
8410-00
(5) Horn relay
The power for the theft deterrent horn relay is supplied to the ICM terminal no. C5 through the battery
SB1 and fuse no. 45 in the interior fuse box.
The relay is operated by the signals from the BCM terminal no. A24. Refer to Conditions For Theft
Deterrent for operating conditions.
(6) Tailgate relay
The power for the tailgate relay is supplied to the ICM terminals no. C10 and no. B5 through the battery
SB1 and fuse no. 42 in the interior fuse box. The relay is operated (i.e. ON/OFF) by the operation signal
from the BCM terminal no. D6.
Deactivation condition
▶
Without SKM
The tailgate open relay is turned OFF immediately after the driver's door is locked or the vehicle
speed becomes 3 km/h or more during its activation.
With SKM
Refer to the section Tailgate of BCM for the operating conditions.
-
-
02-30
(7) Shift lock relay
The shift lock relay is used in the models with A/T and receives power through the SB2 and fuse no. 31
in the interior fuse box with the IGN1 turned ON. If the operating conditions are met (stop lamp switch
ON), the battery power is supplied to the ICM terminal no. C1. If the gear mode conditions are met, the
relay is operated by the signals from the terminal no. 10 of the gear selector lever.
(8) Power outlet relay
The power for the power outlet relay is supplied to the ICM terminal no. B10 through the battery SB1
and fuse no. 46 in the interior fuse box. The relay is earthed through the fuse no. 47 in the interior fuse
box and then ICM terminals no. B2 and no. B12 when the ignition key is turned to ACC.
03-3
8710-01
1. SPECIFICATION
Pin No.
Specification
Remark
Rated voltage
DC 13.5 V
-
Operating voltage
DC 9.0 to 16.0 V
DC 7.0 to 18.0 V (CAN)
-
Operating temperature
-30 to +80°C
-
Storage temperature
-40 to +85°C
-
Transponder
Frequency
134.2 KHz ± 4 KHz
-
Operating
temperature
-40 to +85°C
-
Max. humidity
95%
-
High resistant voltage
24 V
-
Dark current
BCM without SKM: 7.0 mA or less
BCM with SKM: 4.0 mA or less
All switches OFF, key removed,
all doors LOCK and in sleep
mode
Voltage drop
1.0 V or less
at pin B6 and all pins for
IN/OUT
Frequency characteristics
▶
Pin No.
Specification
Remark
Receive frequency
433.920±0.015 MHz
-
Bandwidth
15KHz ± 2KHz or less
-
Modulation method
FSK
-
Range
10M or longer (open)
-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст