SsangYong: Engine Euro 4. Manual — part 107
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
24
DIAGNOSIS
CCCS
• When the seat tilts (front part of the seat
bottom)upward
• Battery level when operating
• Ground level when not operating
However, when the recliner motor is operated
by the driver side switch operation, this infor-
mation does not appear on the ECU. It is be-
cause the switch drives the motor directly. For
more information, go to "Easy access and
memory switch operation" where ECU internal
software drives the motor directly.
• When the seat (forward/backward movement
of seat) slides backward
• Battery level when operating
• Ground level when not operating
However, when the recliner motor is operated
by the driver side switch operation, this infor-
mation does not appear on the ECU. It is be-
cause the switch drives the motor directly. For
more information, go to "Easy access and
memory switch operation" where ECU internal
software drives the motor directly.
• When the seat (forward/backward movement
of seat) slides forward
• Battery level when operating
• Ground level when not operating
However, when the recliner motor is operated
by the driver side switch operation, this infor-
mation does not appear on the ECU. It is be-
cause the switch drives the motor directly. For
more information, go to "Easy access and
memory switch operation" where ECU internal
software drives the motor directly.
• Sensor value when seat slides (forward or
backward movement of the seat) is moving
• Sensor value when moving forward: Increase
• Sensor value when moving backward: Decrease
• Sensor value when seat tilting (front part of
the seat bottom) is moving
• Sensor value when moving upward: Increase
• Sensor value when moving downward: Decrease
• Sensor value when seat height (rear part of
the seat bottom) is moving
• Sensor value when moving upward: Increase
• Sensor value when moving downward: Decrease
• Sensor value when seat recliner (seatback)
is moving
• Sensor value when moving forward: Increase
• Sensor value when moving backward: Decrease
Operating
No.
Sensor value item
Information
Help
Input/
Output
Not
operating
GND
12 V
Driver side seat
tilt-up MTR
Output
14
Driver side seat
slide-backward
MTR
Output
Operating
Not
operating
GND
12 V
15
Driver side seat
slide-forward MTR
Output
Operating
Not
operating
GND
12 V
16
Driver side seat
slide sensor value
Output
17
Driver side seat
tilting sensor value
Input
18
Driver side seat
height sensor
value
Input
19
Driver side
seatback sensor
value
Input
20
Sensor value
Sensor value
Sensor value
Sensor value
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
25
DIAGNOSIS
CCCS
BRAKE
ECU
TCU
A/BAG
TC
RK-STICS
FFH
R/SENSOR
FA
T
C
TGS-LEVER
P/TRUNK
CCCS
DIAGNOSIS OF ESIMS
Code
Malfunction
Help
- ESIMS continuously monitors the sensor values when the driver operates the steer-
ing column or the steering column is in motion. When the teering wheel column
operation is engaged but the sensor value remains unchanged, the motor or the
sensor may be malfunction.
- Measure the sensor values and check the relevant position
• Steering column tilt-up (ESIMS sensor value: No. 1)
• Steering column tilt-down (ESIMS sensor value: No. 2)
• Steering column tilt-up motor (ESIMS sensor value: No. 13)
• Steering column tilt-down motor (ESIMS sensor value: No. 14)
- ESIMS continuously monitors the sensor values when the driver operates the steer-
ing column or the steering column is in motion. When the steering wheel column
operation is engaged but the sensor value remains unchanged, the motor or the
sensor may be malfunction.
- Measure the sensor values and check the relevant position
• Steering column tilt-up (ESIMS sensor value: No. 3)
• Steering column tilt-down (ESIMS sensor value: No. 4)
• Steering column tilt-up motor (ESIMS sensor value: No. 15)
• Steering column tilt-down motor (ESIMS sensor value: No. 16)
- ESIMS continuously monitors the sensor values when the driver adjusts the
inside rearview mirror horizontally or the inside rearview mirror is in motion.
When the inside rearview mirror horizontal operation is engaged but the sensor
value remains unchanged, the motor or the sensor may be malfunction.
- Measure the sensor values and check the relevant position
• Inside rearview mirror moves right (ESIMS sensor value: No. 5)
• Inside rearview mirror moves left (ESIMS sensor value: No. 6)
• Inside rearview mirror left movement motor (ESIMS sensor value: No. 11)
• Inside rearview mirror right movement motor (ESIMS sensor value: No. 12)
- ESIMS continuously monitors the sensor values when the driver adjusts the
inside rearview mirror vertically or the inside rearview mirror is in motion. When
the inside rearview mirror vertical operation is engaged but the sensor value
remains unchanged, the motor or the sensor may be malfunction.
- Measure the sensor values and check the relevant position
• Inside rearview mirror moves down (ESIMS sensor value: No. 7)
• Inside rearview mirror moves up (ESIMS sensor value: No. 8)
• Inside rearview mirror down movement motor (ESIMS sensor value: No. 10)
• Inside rearview mirror up movement motor (ESIMS sensor value: No. 9)
0 X 81
Defective steering col-
umn tilt
• When it’s operated continuously at the stall position, it can be recog-
nized as an error and the motor may not respond. You should erase the
stored errors then test the inside rearview mirror from the mid position.
NOTE
0 X 82
Defective steering col-
umn telescope
0 X 83
Defective inside rearview
mirror left or right move-
ment
0 X 84
Defective inside rear-
view mirror up or down
functions
• When it’s operated continuously at the stall position, it can be recog-
nized as an error and the motor may not respond. You should erase the
stored errors then test the inside rearview mirror from the mid position.
NOTE
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
26
DIAGNOSIS
CCCS
ESIMS Input / Output Data
1. A driver operates the tilt switch at the steering col-
umn upward
2. Ground level when operating
3. Vcc level when not operating
1. A driver operates the tilt switch at the steering col-
umn downward
2. Ground level when operating
3. Vcc level when not operating
1. A driver operates the telescopic switch on the steer-
ing column toward extract
2. Ground level when operating
3. Vcc level when not operating
1. A driver operates the telescopic switch on the steer-
ing column toward retract
2. Ground level when operating
3. Vcc level when not operating
1. A driver presses the right side of the mirror opera-
tion switch when the mirror selector switch is in
the neutral position (center) (at this moment, the
mirror can be adjusted)
2. Ground level when operating
3. Vcc level when not operating
4. When this switch is detected, the mirror moves right
(*Note: The mirror operates when the ignition switch
is in ACC or other position)
5. Receives CAN data from DICS-Main
1. A driver presses the left part of the mirror operation
switch when the mirror selector switch is in center
position (at this moment, the mirror can be adjusted)
2. Ground level when operating
3. Vcc level when not operating
4. When this switch is detected, the mirror moves left
(*Note: The mirror operates when the ignition switch
is in ACC or other position)
5. Receives CAN data from DICS-Main
1. A driver presses the lower part of the mirror opera-
tion switch when the mirror selector switch is in
center position (at this moment, the mirror can be
adjusted)
2. Ground level when operating
3. Vcc level when not operating
4. When this switch is detected, the mirror tilts down
(*Note: The mirror operates if ignition switch is in
ACC or more)
5. Receives CAN data from DICS-Main
1. A driver presses the upper part of the mirror opera-
tion switch when the mirror selector switch is in
center position (at this moment, the mirror can be
adjusted)
2. Ground level when operating
3. Vcc level when not operating
4. When this switch is detected, the mirror tilts up
(*Note: The mirror operates if ignition switch is in
ACC or more)
5. Receives CAN data from DICS-Main
1
2
3
4
5
6
7
8
Steering wheel tilt-up
switch
Steering wheel tilt-
down switch
Steering wheel
telescope up switch
Steering wheel
telescope down switch
Inside rearview mirror
right moving switch
Inside rearview mirror
left moving switch
Inside rearview mirror
down moving switch
Inside rearview mirror
up moving switch
Not
operating
Not
operating
Not
operating
Not
operating
Not
operating
Not
operating
Not
operating
Not
operating
Operating
Operating
Detected
Operating
Operating
Detected
Operating
Operating
Input
Input
Input
Input
Input
Input
Input
Input
No.
Sensor value item
Information
Help
Input/
Output
GND
GND
GND
GND
GND
GND
GND
GND
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
27
DIAGNOSIS
CCCS
BRAKE
ECU
TCU
A/BAG
TC
RK-STICS
FFH
R/SENSOR
FA
T
C
TGS-LEVER
P/TRUNK
CCCS
Sensor value
Sensor value
Sensor value
Sensor value
1. When the mirror (motor for vertical movement) is
moving upward
2. Battery level when operating
3. Ground level when not operating
1. When the mirror (motor for vertical movement) is
moving downward
2. Battery level when operating
3. Ground level when not operating
1. When the mirror (motor for vertical movement) is
moving downward
2. Battery level when operating
3. Ground level when not operating
1. When the mirror (motor for horizontal movement) is
moving right side
2. Battery level when operating
3. Ground level when not operating
1. When the tilt motor on the steering column is
moving upward
2. Battery level when operating
3. Ground level when not operating
1. When the tilt motor on the steering column is moving
downward
2. Battery level when operating
3. Ground level when not operating
1. When the telescopic motor on the steering column
is moving towards the driver
2. Battery level when operating
3. Ground level when not operating
1. When the telescopic motor on the steering column
is moving away from the driver
2. Battery level when operating
3. Ground level when not operating
1. Sensor value when the tilt motor on the steering
column is moving up/down
2. Sensor value when moving up: Decrease
3. Sensor value when moving down: Increase
1. Sensor value when the telescopic motor on the
steering column is moving up/down
2. Sensor value when moving long extraction
: Decrease
3. Sensor value when moving short retraction
: Increase
1. Sensor value when the longitudinal motor in the
mirror moves left or right
2. Sensor value when moving toward right: Increase
3. Sensor value when moving toward left: Decrease
1. Sensor value when the vertical motor in the mirror
moves up or down
2. Sensor value when moving upward: Increase
3. Sensor value when moving downward: Decrease
9
10
11
12
13
14
15
16
17
18
19
20
Inside rearview mirror
up motor
Inside rearview mirror
down motor
Inside rearview mirror
left moving motor
Inside rearview mirror
right moving motor
Steering wheel tilt-up
motor
Steering wheel tilt-
down motor
Steering wheel
telescope up MTR
Steering wheel
telescope down MTR
Steering wheel
column tilting sensor
Steering wheel
column telescope
sensor
Inside rearview mirror
left and right movement
sensor
Inside rearview mirror
up and down
movement sensor
Not
operating
Not
operating
Not
operating
Not
operating
Not
operating
Not
operating
Not
operating
Not
operating
Operating
Operating
Operating
Operating
Operating
Operating
Operating
Operating
Output
Output
Output
Output
Output
Output
Output
Output
Input
Input
Input
Input
No.
Sensor value item
Information
Help
Input/
Output
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
GND
GND
GND
GND
GND
GND
GND
GND
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст