SsangYong: Engine Euro 4. Manual — part 78
O : Turning on when the condition is occurred twice consecutively
•
: Turning on when the condition is occurred once
New DTC
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
100
DIAGNOSIS
ECU
DTC
Trouble
Engine CHECK
warning lamp
Help
Related
I t e m
P0352
#2 Ignition Coil - Faulty
Output Voltage
xxxxx
Condition
- The ignition unit is defective (for No. 3 and 4 cylinders).
Ignition circuit: short circuit to primary and secondary
current
xxxxx
Specification
- Primary resistance: 0.36
Ω
Secondary resistance: 5.9 k
Ω
- Secondary voltage: 38 KV
- Ignition output
Primary current: 7.0 A
Primary voltage: 380 V
xxxxx
Actions
1. Inspect the circuits and terminals of the ECU pin No. 70, 71
and 72.
2. Inspect the power supply of ignition coil.
3. Inspect the ignition coil and high-voltage cable.
4. Inspect the spark plug for moisture, crack, wear, improper
cap and excessive burnt electrode residue.
5. Check the ECU.
#3 Ignition Coil - Faulty
Output Voltage
xxxxx
Condition
- The ignition unit is defective (for No. 1 and 6 cylinders).
Ignition circuit: short circuit to primary and secondary
current
xxxxx
Specification
- Primary resistance: 0.36
Ω
Secondary resistance: 5.9 k
Ω
- Secondary voltage: 38 KV
- Ignition output
Primary current: 7.0 A
Primary voltage: 380 V
xxxxx
Actions
1. Inspect the circuits and terminals of the ECU pin No. 70, 71
and 72.
2. Inspect the power supply of ignition coil.
3. Inspect the ignition coil and high-voltage cable.
4. Inspect the spark plug for moisture, crack, wear, improper
cap and excessive burnt electrode residue.
5. Check the ECU.
P0353
O
O
Ignition Coil
Secondary
Air Supply
System
Defective Secondary
Air Pump - Insufficient
Air Volume
xxxxx
Condition
- The secondary air injection pump relay and air pump valve/
hose are defective.
xxxxx
Specification
- The voltage drop of pin No. 76 and ground: Below 1 V
(current = 1000 mA)
xxxxx
Actions
1. Inspect the circuit and terminal of ECU pin No. 76.
2. Inspect the secondary air pump relay.
3. Inspect the arrange ment of secondary air pump's valve
and hose.
4. Check the ECU.
O
P0411
O : Turning on when the condition is occurred twice consecutively
•
: Turning on when the condition is occurred once
New DTC
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
101
DIAGNOSIS
ECU
BRAKE
ECU
TCU
A/BAG
TC
RK-STICS
FFH
R/SENSOR
FA
T
C
TGS-LEVER
P/TRUNK
CCCS
DTC
Trouble
Engine CHECK
warning lamp
Help
Related
I t e m
Secondary
Air Supply
System
Secondary Air Pump -
Open
to Ground
xxxxx
Condition
- Secondary air injection pump relay circuit: short or open
circuit to ground
xxxxx
Specification
- The voltage drop of pin No. 76 and ground: Below 1 V
(current = 1000 mA)
xxxxx
Actions
1. Inspect the circuit and terminal of ECU pin No. 76.
2. Inspect the secondary air pump relay.
3. Check the ECU.
O
P0413
Secondary Air Pump -
Short circuit to B+
xxxxx
Condition
- Secondary air injection pump relay circuit: short circuit to
battery
xxxxx
Specification
- The voltage drop of pin No. 76 and ground: Below 1 V
(current = 1000 mA)
xxxxx
Actions
1. Inspect the circuit and terminal of ECU pin No. 76.
2. Inspect the secondary air pump relay.
3. Check the ECU.
O
P0414
Faulty Catalyst 1
Purification Rate
(1, 2, 3 Cylinder lines)
xxxxx
Condition
- The calculated purification rate for bank 1 is below the
specified range. (Bank 1 - Cylinder 1/2/3)
xxxxx
Actions
1. Inspect the exhaust gas for leaks.
2. Inspect the oxygen sensor and its signal.
3. Inspect the actual effciency of exhaust gas through the
exhaust gas test.
4. Inspect the catalyst.
5. Check the ECU.
P0420
O
Catalytic
Monitoring
Device
P0430
Faulty Catalyst 2
Purification Rate
(4, 5, 6 Cylinder lines)
xxxxx
Condition
- The calculated purification rate for bank 2 is below the
specified range. (Bank 2 - Cylinder 4/5/6)
xxxxx
Actions
1. Inspect the exhaust gas for leaks.
2. Inspect the oxygen sensor and its signal.
3. Inspect the actual effciency of exhaust gas through the
exhaust gas test.
4. Inspect the catalyst.
5. Check the ECU.
O
O
xxxxx
Condition
- Minute leak of evaporated gas is occurred (below 1 mm).
xxxxx
Actions
1. Inspect the fuel tank and connecting route for the
followings:
- Fuel tank cap for crack or damage
- Vacuum hose for crack, puncture and clogging
- Fuel tank for crack, puncture and damage
- Canister for crack, puncture and damage
- Fuel tank pressure sensor
- Canister shut-off valve
2. Check the ECU.
Fuel Tank: Oil Leakage
P0442
Evaporated
Gas Control
System
O : Turning on when the condition is occurred twice consecutively
•
: Turning on when the condition is occurred once
New DTC
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
102
DIAGNOSIS
ECU
DTC
Trouble
Engine CHECK
warning lamp
Help
Related
I t e m
P0444
Purge Control Solenoid
Valve Malfunction -
Short or Open circuit to
Ground
xxxxx
Condition
- Power supply circuit: short or open circuit to ground
xxxxx
Specification
- Duty ratio: 0 ~ 100 %
below 20 % - 7.5 Hz
20 ~ 30 % - 15 Hz
30 ~ 75 % - 30 Hz
- Internal resistance
26
Ω
xxxxx
Actions
1. Inspect the circuit and terminal of the ECU pin No. 34.
2. Inspect the power of the solenoid valve.
3. Inspect the purge control solenoid valve.
4. Check the ECU.
Purge Control Solenoid
Valve Malfunction -
Short circuit to B+
xxxxx
Condition
- Power supply circuit: short circuit to battery
xxxxx
Specification
- Duty ratio: 0 ~ 100 %
below 20 % - 7.5 Hz
20 ~ 30 % - 15 Hz
30 ~ 75 % - 30 Hz
- Internal resistance
26
Ω
xxxxx
Actions
1. Inspect the circuit and terminal of the ECU pin No. 34.
2. Inspect the power of the solenoid valve.
3. Inspect the purge control solenoid valve.
4. Check the ECU.
P0445
Purge Control Solenoid
Valve Malfunction -
Faulty closing
xxxxx
Condition
- The purge control circuit is defective.
The purge control is not available.
xxxxx
Specification
- Duty ratio: 0 ~ 100 %
Below 20 % - 7.5 Hz
20 ~ 30 % - 15 Hz
30 ~ 75 % - 30 Hz
- Internal resistance
26
Ω
xxxxx
Actions
1. Inspect the circuit and terminal of the ECU pin No. 34.
2. Inspect the power of the solenoid valve.
3. Inspect the purge control solenoid valve.
4. Check the ECU.
P0443
Purge
Control
Solenoid
Valve
O
O
O
O : Turning on when the condition is occurred twice consecutively
•
: Turning on when the condition is occurred once
New DTC
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
103
DIAGNOSIS
ECU
BRAKE
ECU
TCU
A/BAG
TC
RK-STICS
FFH
R/SENSOR
FA
T
C
TGS-LEVER
P/TRUNK
CCCS
DTC
Trouble
Engine CHECK
warning lamp
Help
Related
I t e m
Canister
Shut-off
Valve
P0447
Canister Shut-off Valve
Malfunction - Short or
Open circuit to Ground
xxxxx
Condition
- Fuel system shut-off valve circuit: short or open circuit to
ground
xxxxx
Specification
- Duty ratio: 0 ~ 100 %
below 20 %
→ 7.5 Hz
20 ~ 30 %
→ 15 Hz
30 ~ 75 %
→ 30 Hz
- Internal resistance
26
Ω
xxxxx
Actions
1. Inspect the circuit and terminal of the ECU pin No. 36.
2. Inspect the power of the solenoid valve.
3. Inspect the purge control solenoid valve.
4. Check the ECU.
O
Canister Shut-off
Valve: Short circuit to
B+
xxxxx
Condition
- Fuel system shut-off valve circuit: short circuit to battery
xxxxx
Specification
- Duty ratio: 0 ~ 100 %
below 20 %
→ 7.5 Hz
20 ~ 30 %
→ 15 Hz
30 ~ 75 %
→ 30 Hz
- Internal resistance
26
Ω
xxxxx
Actions
1. Inspect the circuit and terminal of the ECU pin No. 36.
2. Inspect the power of the solenoid valve.
3. Inspect the purge control solenoid valve.
4. Check the ECU.
P0448
O
Fuel tank
pressure
sensor
P0450
Fuel Tank Pressure
Sensor Malfunction
xxxxx
Condition
- Improper fuel tank pressure is detected.
xxxxx
Specification
37.5 mbar
→ 4.51 V
30.0 mbar
→ 3.90 V
20.0 mbar
→ 3.10 V
10.0 mbar
→ 2.30 V
0 mbar
→ 1.50 V
10.0 mbar
→ 0.60 V
12.5 mbar
→ 0.49 V
xxxxx
Actions
1. Measure the actual fuel tank pressure using SCAN-100.
2. Inspect the circuits of ECU pin No. 18 and 41 and check pin
No. 42.
3. Check the fuel tank pressure sensor.
4. Check the ECU.
O
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст