SsangYong: Engine Euro 4. Manual — part 48
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
21
1491
DIAGNOSIS
D27DTP/D27DT (EU4) SM - 2006.08
D27DTP/D27DT (EU4)
ENGINE
FUEL
I
N
T
AKE
EXHAUST
PRE-HEA
TING
LUB
COOLING
SWITCHABLE
ECU
DIAGNOSIS
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
12. If the coding is completed successfully, the comple-
tion message as shown in figure appears, and then
key coding completion screen is displayed.
13. If you want to code for additional keys, remove the
first key from key switch and insert the second key.
Turn it to “ON” position and press
to proceed.
The second key coding message appears and then
key coding completion screen is displayed.
11. When you press
, the immobilizer coding is
activated. When the coding is failed, the failure
screen as shown in figure appears.
14. When the immobilizer coding is completed, press
. The completion message as shown in fig-
ure appears.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
22
1491
DIAGNOSIS
D27DTP/D27DT (EU4) SM - 2006.08
D27DTP/D27DT (EU4)
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڨڤڮڞڠڧڧڜکڠڪڰڮ
ڨڤڮڞڠڧڧڜکڠڪڰڮ
ڞڎڤ
ڞڎڤ
15. When you turn the ignition key to “OFF” position
and press
, the message screen as shown
in figure appears. Wait for 15 seconds and turn the
ignition key to “ON” position.
• Make sure that the data for the four entries (1]
TROUBLE CODE, 5] ECU IDENTIFICATION, 6] INJEC-
TOR CORRECTION and 8] VARIENT CODING) are
correctly entered.
NOTE
16. Press
to return to “MAIN MENU” screen.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
23
1491
DIAGNOSIS
D27DTP/D27DT (EU4) SM - 2006.08
D27DTP/D27DT (EU4)
ENGINE
FUEL
I
N
T
AKE
EXHAUST
PRE-HEA
TING
LUB
COOLING
SWITCHABLE
ECU
DIAGNOSIS
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ECU Replace
(Scan-100 Communication is not available)
If the Scan-100 communication is not available due to
ECU failure, replace the ECU as follows.
1. Replace the ECU with new one.
2. Select “3] ECU REPLACE” and press
on
“FUNCTION SELECTION” screen.
4. VIN/Variant Data/Injector Code(C2I or C3I) Data is
not read from ECU. Press
to run the multi
calibration.
5. Select the appropriate model on “MULTI CALIBRA-
TION SELECTION” screen.
- Vehicle with A/T: 1] EXPORT (EUROPE) A/T
3. If the versions of ECUs are not matched, program
the new ECU after replacement.
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڎ
ڎ
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
24
1491
DIAGNOSIS
D27DTP/D27DT (EU4) SM - 2006.08
D27DTP/D27DT (EU4)
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڨڤڮڞڠڧڧڜکڠڪڰڮ
ڨڤڮڞڠڧڧڜکڠڪڰڮ
ڞڎڤ
ڞڎڤ
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڵڋڎڟڰڋڋڋڋڋڋڋڋڋڋڋڋ
ڵڋڎڟڰڋڋڋڋڋڋڋڋڋڋڋڋ
کڞڝڎړ
کڞڝڎړ
ڜڋڌ
ڜڋڌ
ڟڴګڥڎڍړڋڋڋڋڋڌ
ڟڴګڥڎڍړڋڋڋڋڋڌ
ٻٻٻٻٻڍڋڋڑڈڋڏڈڋڎ
ٻٻٻٻٻڍڋڋڑڈڋڏڈڋڎ
ڱڤکٻڲۍۄۏۀ
ڱڤکٻڲۍۄۏۀ
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
6. If the MULTI-CALIBRATION is completed
successfully, the message screen shown in the fig-
ure is displayed.
9. Press “ENTER” and enter the VIN again.
10. Enter the VIN into the number plate on the screen.
To change the number to the character, use the
arrow keys.
7. To enter the data manually, press “ESC” on the
screen in Step 5 and return to main screen. To en-
ter the VIN, variant data, and injector code(C2I or
C3I), select “5] ECU IDENTIFICATION”, “6] INJEC-
TOR (C2I or C3I) CORRECTIONS” and “7] VARI-
ANT CODING”.
8. To enter the VIN, select “5] ECU IDENTIFICATION”
and press “ENTER”.
• The VIN/Variant Data/Injector Code (C2I or C3I)
Data should be input manually.
NOTICE
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст