SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 311
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
58
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
P2100
P2101
P2102
P2103
P2104
P2105
Defective 1-2, 4-5 shift solenoid valve
1-2, 4-5 shift solenoid valve - short
Defective 2-3 shift solenoid valve
2-3 shift solenoid valve - short
Defective 3-4 shift solenoid valve
3-4 shift solenoid valve - short
- When 1-2 or 4-5 shift solenoid valve is defective.
- Measure the resistance of 1-2 or 4-5 shift solenoid valve (turn the IGN
OFF, then and disconnect TCU connector).
• TCU connector terminals: B12, B3
• Specified value: 3.8 ± 0.2
Ω
- Triggered emergency mode when the defective is detected.
• Fixed at 2nd gear in “D” range.
- Check the related harness for open, short and contact.
- When 1-2 or 4-5 shift solenoid valve is defective.
- Measure the resistance of 1-2 or 4-5 shift solenoid valve (turn the IGN
OFF, then disconnect TCU connector).
• TCU connector terminals: B12, B3
• Specified value: 3.8 ± 0.2
Ω
- Triggered emergency mode when the defective is detected.
• Fixed at 2nd gear in “D” range.
- Check the related harness for open, short and contact.
- When 2-3 shift solenoid valve is defective.
- Measure the resistance of 2-3 shift solenoid valve (turn the IGN OFF,
then disconnect TCU connector).
• TCU connector terminals: B10, B3
• Specified value: 3.8 ± 0.2
Ω
- Triggered emergency mode when the defective is detected.
• Fixed at 2nd gear in “D” range.
- Check the related harness for open, short and contact.
- When 2-3 shift solenoid valve is defective.
- Measure the resistance of 2-3 shift solenoid valve (turn the IGN OFF,
then disconnect TCU connector).
• TCU connector terminals: B10, B3
• Specified value: 3.8 ± 0.2
Ω
- Triggered mechanical emergency mode when the defective is detected.
• Fixed at 2nd gear in “D” range.
- Check the related harness for open, short and contact.
- When 3-4 shift solenoid valve is defective.
- Measure the resistance of 3-4 shift solenoid valve (turn the IGN OFF,
then disconnect TCU connector).
• TCU connector terminals: B11, B3
• Specified value: 3.8 ± 0.2
Ω
- Triggered mechanical emergency mode when the defective is detected.
• Fixed at 2nd gear in “D” range.
- Check the related harness for open, short and contact.
- When 3-4 shift solenoid valve is defective.
- Measure the resistance of 3-4 shift solenoid valve (turn the IGN OFF,
then disconnect TCU connector).
• TCU connector terminals: B11, B3
• Specified value: 3.8 ± 0.2
Ω
- Triggered mechanical emergency mode when the defective is detected.
• Fixed at 2nd gear in “D” range.
- Check the related harness for open, short and contact.
Trouble
Code
Action
Defectives
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
59
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
P2106
P2107
P2108
P2200
P2203
P220A
P2220
P2221
Defective lockup clutch solenoid valve
Defective modulator pressure sole-
noid valve
Defective shift pressure solenoid
valve
Faulty rpm sensor N2 signal
Faulty rpm sensor N3 signal
Abnormal rpm sensor output signal
(N2, N3)
Oil temperature sensor - short
Abnormal oil temperature sensor
signal
- Measure the resistance of lockup clutch solenoid valve (turn the IGN
OFF, then disconnect TCU connector).
• TCU connector terminals: B9, B3
• Specified value: 2.5 ± 0.2
Ω
- Triggered emergency mode when the defective is detected.
• Fixed at 2nd gear in “D” range.
- Check the related harness for open, short and contact.
- Measure the resistance of modulator pressure solenoid valve (turn the
IGN OFF, then disconnect TCU connector).
• TCU connector terminals: B5, B3
• Specified value: 5.0 ± 0.2
Ω
- Triggered emergency mode when the defective is detected.
• Fixed at 2nd gear in “D” range.
- Check the related harness for open, short and contact.
- Measure the resistance of shift pressure solenoid valve (turn the IGN
OFF, then disconnect TCU connector).
• TCU connector terminals: B4, B3
• Specified value: 5.0 ± 0.2
Ω
- Triggered emergency mode when the defective is detected.
• Electrical error: Fixed at 2nd gear in “D” range.
- Check the related harness for open, short and contact.
- When the rpm sensor N2 detects 0 rpm of front sun gear speed.
- Check the related harness for open, short and contact.
• TCU connector terminal B6: rectangular wave signal
B8: signal ground
B13: 6V
- When the rpm sensor N3 detects 0 rpm of planetary gear carrier speed.
- Check the related harness for open, short and contact.
• TCU connector terminal B6: rectangular wave signal
B8: signal ground
B13: 6V
- When the rpm difference between rpm sensor N2 and N3 is over
150 rpm.
- Check the related harness for open, short and contact.
- Turn the IGN OFF, then disconnect TCU connector.
- Selector lever position: R or D
- Measure the resistance of oil temperature sensor.
• TCU connector terminals: B7, B8
- Check the related harness for open, short and contact.
- Turn the IGN OFF, then disconnect TCU connector.
- Selector lever position: R or D
- Measure the resistance of oil temperature sensor.
• TCU connector terminals: B7, B8
- Check the related harness for open, short and contact.
Trouble
Code
Action
Defectives
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
60
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
P2222
P2300
P2301
P2310
P2311
P2312
P2313
P2315
P2317
P2330
P2331
P2332
P2333
P2335
Abnormal oil temperature sensor signal
Faulty CAN communication
Faulty CAN communication
CAN: Faulty brake system communi-
cation
CAN: Faulty ECU communication
CAN: Faulty ECU communication
CAN: Faulty selector lever control
communication
CAN: Faulty instrument panel commu-
nication
CAN: Faulty communication between
TCCU/TOD and CAN
CAN: Faulty brake system signal
CAN: Faulty ECU message
CAN: Faulty ECU message
CAN: Faulty selector lever signal
CAN: Faulty instrument cluster signal
- Turn the IGN OFF, then disconnect TCU connector.
- Selector lever position: R or D
- Measure the resistance of oil temperature sensor.
• TCU connector terminals: B7, B8
- Check the related harness for open, short and contact.
- Turn the IGN OFF, then disconnect TCU connector.
- Check the communication line for open, short and contact.
- Measure the resistance of CAN line: B1, B2
• Specified value: approx. 60
Ω
- Turn the IGN OFF, then disconnect TCU connector.
- Check the communication line for open, short and contact.
- Measure the resistance of CAN line: B1, B2
• Specified value: approx. 60
Ω
- Check CAN communication line H and L.
- Check ABS/ESP unit.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check engine ECU.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check engine ECU.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check selector lever.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check instrument cluster.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check TCCU/TOD unit.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check ABS/ESP unit.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check engine ECU.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check engine ECU.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check selector lever.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check instrument cluster.
- Check the related harness for open, short and contact.
Trouble
Code
Action
Defectives
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
61
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
P2337
P2400
P2401
P2402
P2403
P2404
P2405
P2406
P2407
P2408
P2409
CAN: Faulty TCCU/TOD
CAN: Faulty rear RH wheel speed
sensor signal
CAN: Faulty rear LH wheel speed
sensor signal
CAN: Faulty front RH wheel speed
sensor signal
CAN: Faulty front LH wheel speed
sensor signal
CAN: No brake signal
CAN: No accelerator pedal signal
CAN: No engine torque signal
CAN: No ESP signal
CAN: No minimum engine torque signal
CAN: No maxmum engine torque signal
- Check CAN communication line H and L.
- Check TCCU/TOD unit.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check ABS/ESP unit.
• Check wheel speed sensor connector.
• Check the air gap between tooth wheel and wheel speed sensor.
Check tooth wheel installation. (specified air gap: 0.309~0.958 mm).
• Check the numbers of tooth wheel: 48
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check ABS/ESP unit.
• Check wheel speed sensor connector.
• Check the air gap between tooth wheel and wheel speed sensor.
Check tooth wheel installation. (specified air gap: 0.309~0.958 mm).
• Check the numbers of tooth wheel: 48
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check ABS/ESP unit.
• Check wheel speed sensor connector.
• Check the air gap between tooth wheel and wheel speed sensor.
Check tooth wheel installation. (specified air gap: 0.335~0.945 mm)
• Check the numbers of tooth wheel: 48
- Check CAN communication line H and L.
- Check ABS/ESP unit.
• Check wheel speed sensor connector.
• Check the air gap between tooth wheel and wheel speed sensor.
Check tooth wheel installation. (specified air gap: 0.335~0.945 mm)
• Check the numbers of tooth wheel: 48
- Check CAN communication line H and L.
- Check ABS/ESP unit.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check engine ECU.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check engine ECU.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check engine ECU.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check engine ECU.
- Check the related harness for open, short and contact.
- Check CAN communication line H and L.
- Check engine ECU.
- Check the related harness for open, short and contact.
Trouble
Code
Action
Defectives
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст