SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 440
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY INTERIOR
STAVIC - 2004.09
74
5A
4) Fire Extinguisher & OVM Tool
Fire Extinguisher
- Under rear 3rd seat
OVM Tool
- Under rear 3rd seat floor cover.
Components
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY INTERIOR
STAVIC - 2004.09
75
5A
INSTRUMENT PANEL ASSEMBLY
3. Remove door molding
and “A” pillar cover
.
4. Remove the I/P panel side cover (LH/RH).
5. Remove the front center speaker
, cluster and center
cover assembly
.
6. Remove the center console assembly
and AV head
unit.
Door molding
“A” pillar
Center speaker
Cluster and center cover
Center speaker
“P” pillar
Door molding
Center console
assembly
Lower panel - Driver
Lower panel - passenger
Preceding Work:
1. Disconnect the battery negative cable.
2. Remove all the parts shown on the picture below.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY INTERIOR
STAVIC - 2004.09
76
5A
7. Remove the lower panel assembly.
1) Disconnect incar / humidity sensor, 4WD operation
switch, rear wiper switch (2).
8. Remove instrument lower panel assembly (passenger
side).
1) Remove the glove box.
2) Remove the lower inner panel.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY INTERIOR
STAVIC - 2004.09
77
5A
10. SDM connector
3. LH floor connector
12. Brake connector
11. Parking connector
14. Sensor cluster
4. T/M controller & Earth
13. Accelator connector
1. REMOVAL AND INSTALLATION
1. Disconnect all the connector at the I/P panel.
1) Driver
1. Sun roof
2. Door connector, floor, seat belt pretensioner
16. Earth
17. Earth
2) Passenger
3. Door connector, floor, seat belt pretensioner
7. GPS
8. Audio optic cable connector
9. Rear monitor
18. Earth
9. Rear monitor
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст