SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 315
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
80
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
1. Remove the front and rear propeller shaft from the transfer
case.
Oil draining
If necessary, drain the oil. However, when removing or install-
ing the transmission without any other processes, just add oil
excluding drainage.
Installation Notice
Rear
Front
Tightening torque
14 Nm
No
4
4
Tightening torque
81 ~ 89 Nm
70 ~ 80 Nm
Bolt
M17
M14
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
81
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
2. Disconnect T/C motor connector, T/M plug connector, T/M shift lever, air bleeder hose and other attachments.
1. T/C motor connector (1) & plug connector (2).
2. Air bleeder hose (3).
3. T/M shift lever.
* Locate the shift lever in “N”.
“P”
“N”
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
82
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
3.
Remove T/M oil return pipe (A), supply pipe (B), oil filler pipe (C) from T/M.
A. Oil return pipe
○○○○○○○○○○○○○
○
○
B. Oil supply pipe
C. Oil filler pipe
* Transmission Assembly
[Notice]
1. Collect the dropping oil from removed pipes in the oil collecter and seal the pipes with caps.
2. Be careful not to contaminate the body and work space.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
83
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
4. For easier removal, unscrew the stabilizer mounting bolts (B) and put it down to the sub frame.
5. Support the transmission with hydraulic jack.
A. Stabilizer bar link
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст