SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 258
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
MULTIMETER
STAVIC - 2004.09
6
2F
4. FUNCTIONS IN EACH MODE
1) Time and Date
Displays and adjusts time, date, and day of the week.
Adjusting the Time and Date
1. Press and hold the MODE button for more than 1 second to start time and date mode. Move and select the
information to be adjusted while briefly pressing the MODE button (0.5 seconds). The selected information
is blinking.
Changing sequence:
3. Adjust the information by using UP or DOWN button.
4. Press and hold the MODE button for more than 1 second to set the time and date.
[Note]
- A day of the week is automatically changed according to the adjusted date, month, and year.
- An intercalary is automatically calculated.
AM (PM)
Hour
Minute
Day
Month
Year
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
MULTIMETER
STAVIC - 2004.09
7
2F
2) Direction, Atmospheric Pressure, Altitude Mode
Electronic Compass
It indicates 8-direction by interval of 45° according to the vehicle’s driving direction.
2. Turning Calibration
This operation is needed to calibrate the indication tolerance between the actual direction and the indicated direction
at current vehicle location.
Turning calibration conditions
- when the multi-meter is installed in the vehicle.
- when the battery is replaced.
Turning calibration procedure
1. When pressing the MODE and UP button simultaneously for more than 1 second, the current direction flashes.
2. Turn the vehicle over 1 complete circle within 128 seconds slowly, then the calibration will be accomplished.
3. When the calibration is finished, the vehicle’s new direction will be indicated.
1. Screen display for direction
Display
N
NE
E
SE
S
S W
W
NW
Direction
0
°
45
°
90
°
135
°
180
°
225
°
270
°
315
°
[Note]
This function is available only when the vehicle speed is over 2.8 km/h.
[Note]
The turning calibration process is automatically canceled if the vehicle is not turned within 120 seconds after calibration
mode started.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
MULTIMETER
STAVIC - 2004.09
8
2F
How to calibrate the absolute altitude
1) UP button
Press briefly (below 0.5 seconds): increases by 20 m
Press and hold (over 0.5 seconds): continues to increase by 20 m with the interval of 0.2 seconds
2) DOWN button
Press briefly (below 0.5 seconds): decreases by 20 m
Press and hold (over 0.5 seconds): continues to decrease by 20 m with the interval of 0.2 seconds
How to erase the calibrated altitude value
Press the UP and DOWN buttons simultaneously for more than 1 second to cancel the altitude calibration.
Altitude calibration range
It can be calibrated by 300 m within the range of 0 to 2,800 m.
Current altitude
Current atmospheric pressure
Altimeter
1. Absolute Altimeter
0 m above the sea level is equivalent to 1013.25 hpa and the altimeter convert the difference between this pressure and
atmospheric pressure to absolute altitude. Its Indication range is -200 m to 2,800 m.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
MULTIMETER
STAVIC - 2004.09
9
2F
2. Relative Altimeter
It indicates the specific area’s relative altitude based on the current altitude of the vehicle (current altitude is indicated
to 0 m).
Indication of base altitude
Indication of relative altimeter
Changing to relative altimeter mode
The mode is switched between the relative altimeter mode and absolute altimeter mode when pressing the MODE
button over 1 second in direction/atmospheric pressure/altitude mode.
Barometer
It indicates the current atmospheric pressure in range from 720 hpa to 1045 hpa by 1 hpa.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст