SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 448
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
26
5B
Rear Window Regulator / Glass Run
Preceding Work: Removal of door trim
1. Remove upper guide channel with two bolts, as weather strip is pulled.
2. Remove two screws in carrier plate and disassemble the window glass.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
27
5B
4. Remove window regulator & motor mounting nuts (6 mm
- 7 EA)
5. Disconnect power window motor connector.
3. Disassemble lower guide channel (two nuts).
6. Disassemble power window regulator & window motor
assemble.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
28
5B
Door Latch & Crank Assembly - Rear
1. Disconnect handle rod - outside door (B) and power window unit connector (A)
2. Remove three nuts (C) to disassemble latch & crank assembly.
○○○○○○○
○○○○○○○○○○○○
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
29
5B
Outside Door Handle - Rear
1. Disconnect handle rod - outside handle.
2. Remove three nuts (6 mm - 3 EA).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст