SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 409
ABS/ESP SYSTEM
STAVIC - 2004.09
19
4K
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Front Wheel Speed Sensor
1. Disconnect the battery negative cable.
2. Disconnect the front wheel speed sensor connector.
3. Remove one of self-locking bolt.
Tightening torque
4. Remove wheel speed sensor.
5. When install, clean the sensing area and replace the
self-locking bolt with new one.
Rear Wheel Speed Sensor
1. Disconnect the battery negative cable.
2. Disconnect the speed sensor connector.
3. Remove one of self-locking bolt.
4. Remove rear wheel speed sensor.
Tightening torque
Front wheel speed sensor
Airgap
19 ~ 25 mm
0.369 ~ 1.213 mm
Rear wheel speed sensor
Airgap
19 ~ 25 Nm
0.3677 ~ 1.229 mm
5. When install, clean the sensing area and replace the
self-locking bolt with new one.
ABS/ESP SYSTEM
STAVIC - 2004.09
20
4K
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
System Fuse
The ABS/TCS system fuse and SB2 is located at the fuse
box in engine compartment.
Indicators
The ABS and TCS indicators are in instrument cluster.
ABS/ESP SYSTEM
STAVIC - 2004.09
21
4K
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
1. Remove the disc brake rotor. Refer to Front Disc Brakes
Section.
2. Remove the ABS front tooth wheel using the ABS tooth
wheel puller (1).
Removal
ABS FRONT TOOTH WHEEL
Installation
1. Install the ABS front tooth wheel using the ABS tooth
wheel installer (2).
ABS/ESP SYSTEM
STAVIC - 2004.09
22
4K
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
8. SPECIAL TOOLS AND EQUIPMENT
Name and Part Number
Application
661 589 16 33 00
ABS tooth wheel puller
661 589 17 33 00
ABS tooth wheel installer
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст