SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 244
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
32
2E
Multifunction switch connector
1) Light switch and auto light switch
2) Dimmer and passing switch
3) Turn signal lamp switch
4) Wiper and intermittent switch
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
33
2E
1. Be careful not to drop or shock the air bag module
during removal procedures.
2. Lift up the hook when disconnecting the air bag
contact coil connector.
Cautions
A
1. Place the steering wheel to the straight forward direction.
Unscrew the screws at both sides and remove the horn
pad (air bag module).
2. Put an installation mark on the steering wheel and nut and remove the steering wheel.
Removal and Installation of Multifunction Switch Assembly
Preceding work: Disconnection of negative battery cable
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
34
2E
3. Remove the driver side instrument lower panel
.
4. Unscrew the screws from the steering column cover and
remove the upper and lower covers.
5. Disconnect the multifunction switch connector. Unscrew the screws from the air bag contact coil, and remove the
air bag contact coil assembly.
* For installation, align the steering wheel to the
installation mark and tighten the nut to the
specified tightening torque.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
35
2E
6. Disconnect the steering wheel angular sensor connector. Unscrew the screws and remove the multifunction switch
assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст