SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 426
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY INTERIOR
STAVIC - 2004.09
18
5A
4. Install in the reverse order of removal.
Tightening torque
10 ± 1.0 Nm
[Notice]
Allgn the contact coil to the right direction. (Refer to the arroow mark in the following picture)
If thealignment of contact coil, is not precise. It could result in a accident due to bad steering condition.
Also, it can damage a contact coil and therefore, can be a reason of airbag failure.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY INTERIOR
STAVIC - 2004.09
19
5A
Passenger’s Airbag
1. Disconnect the battery negative cable.
2. Remove the I/P panel.
3. Remove the supplementary airbag module.
4. Install in the reverse order of removal.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY INTERIOR
STAVIC - 2004.09
20
5A
Airbag Unit (SDM)
Preceding Work: Remove the center facia
1. Remove the center floor duct.
2. Disconnect the SDM and ground connectors.
3. Remove the SDM from the mounting deck.
4. Install in the reverse order of removal.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY INTERIOR
STAVIC - 2004.09
21
5A
Upper anchor
Retractor
Buckle
Lower anchor
Upper anchor
Retractor
Buckle
Lower anchor
Height adjuster
Buckle
Lower anchor
Pretensioner
Upper anchor
Retractor
Buckle
Lower anchor
SEAT BELT
Rear 1st row (3 point + 2 point)
Rear 3rd row (3 point + 2 point)
Rear 2nd row (3 point + 2 point)
Front Seat Belt (3 point)
1. COMPONENTS
11 Passengers
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст