SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 116
DI05-16
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LUBRICATION SYSTEM
DI ENG SM - 2004.9
OIL PAN ASSEMBLY
1. Oil pump
9. Oil pump cover
10. Bolt
32. Drain plug washer
33. Drain plug . . . .. 25
± 2.5 Nm(replace the washer)
35. Spring pin
36. Oil pump drive shaft
37. Oil pump driven shaft
38. Oil pump relief valve piston
39. Spring
40. Oil pump relief valve pin
41. Oil pump relief valve plug
44. Bolt . . . . . . . . . . . . . . . . ... 10 Nm
45. Washer
46. Bolt
49. Oil pump roller chain
50. Oil pump chain lock link
51. Oil pump chain tensioner
52. Oil pump chain spring
53. Bush
56. Oil pump sprocket
57. Bolt
58. Dust cover
59. Cylindrical pin
DI05-17
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LUBRICATION SYSTEM
DI ENG SM - 2004.9
BLANK
DI05-18
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LUBRICATION SYSTEM
DI ENG SM - 2004.9
Removal and Installation of Oil Pan
Preceding works:
- Draining engine coolant
- Setting up the safety device for the sub frame and
removal of tires
- Removal of front propeller shaft
Procedures for Sub Frame Assembly
1. Placing the wheel chocks
The large portion of vehicle weight is applied to the
rear part of the vehicle when working on the 4-post
lift. Place the chocks under the rear wheels as
shown in the figure.
2. Installing the safety stands
To minimize the hazard, install two safety stands
under the sub frame before removing it. Pay particu-
lar attention that all the stands have same height.
3. Supporting points of auxiliary lift for sub frame
The auxiliary lift is used for removing and installing the sub frame. It should be located under the correct points in front
and rear sides of the sub frame. (The center point of gravity of sub frame is at the front axle mounting area.)
View from front side
View from rear side
16cm
DI05-19
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LUBRICATION SYSTEM
DI ENG SM - 2004.9
4. Installing the engine bracket
Remove the existing engine mounting brackets and install the special ser-
vice tools (temporary engine bracket) on the correct locations (dotted circles
in the figure) before removing the sub frame.
Special service tool
for engine mounting
Engine mounting
bracket
View from right side
View from left side
A9912 008 2B
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст