SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 364
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
4
4E
2. SPECIFICATION
Suspension type
Spring type
Shock absorber type
Stabilizer type
Double wishbone
Coil spring : K = 8.8 (kgf/mm)
Gas type
Torsion bar :
∅ 30
Camber : 0
°
±
30
′
Caster : 4.5
°
±
30
′
Toe-in : 0 ~ 4 (mm)
214 (mm)
34 (kg)
250.43 (mm)
1.4 ( )
SAE 90
3.7
11
41
3.9
11
43
4.1
9
37
4.3
11
47
4.6
9
41
4.9
9
44
5.4
8
43
5.9
7
41
Pinion
Gear
Weight
Length
Oil capacity
Specified oil
Wheel alignment
Axle size
Axle ratio
Number of tooth
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
5
4E
Dimension (Sub Frame)
(Unit : mm)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
6
4E
3. FRONT AXLE ASSEMBLY
Front axle assembly located between left and right wheel transfer the power from the transmission to both wheel when
4-wheel drive mode is chosen.
At the end of axle sides, axle shafts are connected by constant velocity joint and differential carrier is located in the axle
housing.
Drive Shaft Assembly
Left and right axle have same over length and removal and
maintenance are easily performed.
Left drive shaft
Right drive shaft
Front propeller shaft
Mounting Point
Mounting Point
Mounting Point
Location
In boot
Out boot
Grease capacity
140 ~ 160g
200 ~ 220g
Wheel side
Diffential carrier side
Out boot
In boot
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
7
4E
* Characteristics of front suspension
1. Upper arm mounted relatively high.
2. Coil spring and shock absorber mounted.
3. Maximzed torsion bar effciency.
4. Big rubber bush for better comfort.
5. Minimized king pin offset to decrease vehicle movement.
6. Increased effective wheel base.
7. Diversfied type (2WD, 4WD)
Upper arm
Knuckle
Lower arm
Stabilizer bar
Coil spring
4. FRONT SUSPENSION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст