SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 7
1B-7
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE MECHANICAL
M162 GSL ENG SM - 2005.7
23. Disconnect the terminals from the alternator.
25. Remove the service hole cover in the engine block.
26. Put the alignment mark for installation, and remove the
six mounting bolts for torque converter from drive plate
through the service hole by rotating the engine and
remove the torque converter.
Installation Notice
• Screw the six bolts mounting the torque converter
through the service hole by using a mirror and
rotating the engine.
Tightening torque
42 Nm (31 lb-ft)
24. Disconnect engine main wiring connector.
27. Remove the exhaust manifold and exhaust pipe.
Installation Notice
Tightening torque
30 Nm (22 lb-ft)
1B-8
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE MECHANICAL
M162 GSL ENG SM - 2005.7
28. Remove the transmission mounting bolts and separate
the transmission from the engine.
Installation Notice
31. Carefully separate the engine assembly from the
vehicle.
32. Installation should follow the removal procedure in the
reverse order.
29. Install a chain to the bracket of engine, by using a hoist
or crane.
30. Remove the engine mounting bracket nuts.
Installation Notice
Tightening torque
54 ~ 68 Nm
(40 ~ 50 lb-ft)
Tightening torque
Upper: 70 Nm (52 lb-ft)
Lower: 38 Nm (28 lb-ft)
1B-9
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE MECHANICAL
M162 GSL ENG SM - 2005.7
POLY V-BELT
Preceding Work: Removal of cooling fan
1. Poly V-belt
2. Belt tensioning pulley
Removal & Installation Procedure
1. Release the belt tension by turning the belt tensioning
pulley nut clockwise.
Installation Notice
2. Remove the poly v-belt.
Notice
Check the belt for damage and tensioning pulley
bearing point for wear and replace them if necessary.
3. Install the belt by turning the nut of tensioning pulley
clockwise.
POLY V-BELT AND TENSIONING DEVICE
Tightening torque
40.5 ~ 49.5 Nm
(29.9 ~ 36.5 lb-ft)
1B-10
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE MECHANICAL
M162 GSL ENG SM - 2005.7
Poly V-Belt Arrangement
1. Belt tensioning pulley
2. Crankshaft belt pulley
3. A/C compressor pulley
4. Cooling fan pulley
5. Generator pulley
6. Idler
7. Power steering pump pulley
8. Cooling fan and water pump pulley
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст