SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 367
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
16
4E
3. REMOVAL OF SUB FRAME
Preceding Work: 1. Secure the frame and remove the tires
2. Remove the front propeller shaft.
Sub Frame Connected Area
1. Remove the power steering pipes
(A: High, Low pressure) and lower arm
shaft (B) at the rear side of syb frame.
2. Remove the front calier (C) and wheel speed sensor (D)
(Fix the caliper and speed sensor on the body. Disconnect the brake
hose clip)
Wheel
3. Unscrew the power steering pipe (A) mounting bracket
(1, 2) and release them
4. Unscrew the knuckle upper bolt (E) and
shock absorber lower bolt/nut (F) and then,
remove the shock absorber from knuckle.
Power steering
pipes (Front)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
17
4E
5. Leave mark with a marking painter on the sub frame mounting bolts (19mm - 4EA).
(Tightening torque: 95 ~ 142 Nm)
6. Locate two sypplement lifts under sub frame (Front/Rear) and unscrew the sub frame mounting bolts (19mm -
6EA). And then, drop the lifts slowly.
[Notice]
Apply rubber blocks under sub frame to prevent the frame and other components from damage.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
18
4E
Rubber block at the front side
Rubber blocks at the rear side
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
19
4E
7. Installation is in the reverse order of removal (Keep the exact mount holes and tightening torque)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст