SsangYong Rodius (2013 year). Manual — part 75
11-4
2. TROUBLESHOOTING
Problem
Possible Cause
Action
Engine will not crank
Low battery voltage
Charge or replace
Loose, corroded or damaged battery cable
Repair or replace
Faulty starter or open circuit
Faulty ignition switch or blown fuse
Repair or replace
Poor engine ground
Repair
Engine cranks too
slow
Low battery voltage
Charge or replac
Loose, corroded or damaged battery cable
Repair or replace
Faulty starter
Starter does not
stop
Faulty starter
Faulty ignition switch
Replace
Engine cranks
normally, but does
not start
Broken pinion gear or faulty starter
Replace the starter
Broken flywheel ring gear
Replace
Open circuit
Repair
11-5
1461-01
1. SYSTEM DESCRIPTION
The starter (start motor) starts the engine with rotational power by converting the electric energy to the
mechanical energy.
When the engine is cranking, the pinion gear meshes with the ring gear. If the ring gear overruns, the
pinion gear clutch overruns to protect the pinion gear.
2. OPERATING PROCESS
1) System Layout
11-6
2) Circuit Diagram
12-3
8510-23
1. CRUISE CONTROL SWITCH
The cruise control is an automatic speed control system that maintains a desired driving speed without
using the accelerator pedal.
The vehicle speed must be greater than 36 km/h to engage the cruise control. This feature is
especially useful for motorway driving.
The cruise control system is a supplementary system, which helps the driver to drive the vehicle at
a desired speed without using the accelerator pedal under the traffic condition where the vehicle-to-
vehicle distance meets the legal requirement.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст