SsangYong Rexton. Manual — part 668
BODY EXTERIOR 9C-45
SSANGYONG Y200
YAD9C1Y0
7. For the right position installed of glass which wind
shield is fixed, stick tape on moulding, and frame
of wind shield.
8. To keep sealant dry, park the vehicle for 24 hours.
9. Remove tape1.
10. Spread water on the wind shield glass, and then
check leaking of water. If leaking of water happen,
after keep wind shield glass dry, fill sealant on
the section of leaking, if leaking of water goes on,
w i n d s h i e l d g l a s s i s r e m o v e d , t h e a b o v e
descriptive work proceed to repair once again.
FRONT QUARTER GLASS
Removal
1. After releasing fixing nut of quarter glass, remove
cover of glass moulding.
2. After removing quarter glass, using knife, remove
sealant of quarter and frame.
YAD9C1W0
YAD9C1X0
SSANGYONG Y200
9C-46 BODY EXTERIOR
;;;;
;;;;
;;;;
;
;
Installation
1. Wash up body frame (section of glass installed).
2. As keeping distance like the left picture, spread
primer on the section of frame of installed glass.
3. Spread primer on the moulding of quarter glass of
new quarter glass.
YAD9C1Z0
YAD9C2A0
BODY EXTERIOR 9C-47
SSANGYONG Y200
YAD9C2B0
YAD9C2C0
4. As keep distance like left picture, spread sealant
on the glass.
5. After Install glass of front quarter on the body
frame, tighten nut on the bolt of mounting.
6. After installing front quarter glass, proceed to
check leaking of water.
SSANGYONG Y200
9C-48 BODY EXTERIOR
;;
;;
;;
;;
;;
;;
YAD9C2D0
YAD9C2E0
YAD9C2F0
REAR QUARTER GLASS
Removal
1. After using special tool, remove sealant around
glass.
2. Remove rear quarter glass.
3. After spread on the new rear quarter glass, install
glass moulding.
Installation
1. Wash up the section of body frame.
2. As keep distance like the left picture, spread
primer.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст