SsangYong Rexton. Manual — part 501
FRONT BRAKE 4B-9
SSANGYONG Y200
YAD4B120
YAD4B130
YAD4B140
4. Remove the brake disc (Full-time 4WD)
5. Pull out the cotter pin from the front hub assembly
and remove the lock nut. (Full-time 4WD)
6. Remove the hub assembly mounting bolt and
remove the hub assembly.
Notice: For part-time 4WD, remove the locking hub
assembly and hub range before removing the
brake disc.
SSANGYONG Y200
4B-10 FRONT BRAKE
YAD4B150
YAD4B160
YAD4B170
YAD4B180
BRAKE PAD REPLACEMENT
1. Remove lower mounting bolt of the brake caliper
cylinder.
2. Move the caliper cylinder assembly upward and
fix it to prevent hose damage.
3. Remove the brake pad and replace the new pad.
4. Install the caliper cylinder assembly and fasten
the lower bolt.
Full-time
Part-time
FRONT BRAKE 4B-11
SSANGYONG Y200
YAD4B190
Installation Procedure
1. Install the front brake disc assembly to the knuckle
and fasten the lock nut as specified torque (full-
time 4WD).
YAD4B200
YAD4B210
YAD4B220
Install the front brake disc to the knuckle and
install the locking hub & hub range. Fasten the
mounting bolt (part-time 4WD).
2. Install the caliper assembly to the front disc and
fasten the caliper mounting bolt.
Installation Notice
Tightening Torque
85 - 105 N•m
(63 - 79 lb-ft)
SSANGYONG Y200
4B-12 FRONT BRAKE
YAD4B230
3. Connect the brake hose to the caliper cylinder.
Installation Notice
Tightening Torque
7 - 13 N•m
(62 - 115 lb-in)
Notice: The washer should be replaced new part.
4. Bleed the brake system after replacement.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст