SsangYong Rexton. Manual — part 301
M162 ENGINE MECHANICAL 1B1-7
SSANGYONG Y200
24. Separate the hose toward engine from canister
purge solenoid valve.
26. Separate the vacuum hose for brake booster.
27. Separate the other vacuum hoses.
25. Remove the automatic transmission oil cooler line.
Installation Notice
22. After removing the ignition coil cover, disconnect
the ignition coil connector.
23. Remove the harness cover and disconnect the 6
injection valve connectors. Disconnect the main
harness.
YAD1B140
YAD1B4N0
YAD1B150
YAD1B160
Tightening Torque
25 - 35 N•m
(18 - 26 lb-ft)
SSANGYONG Y200
1B1-8 M162 ENGINE MECHANICAL
28. Remove the service hole cover in the engine block.
29. Put the alignment mark for installation, and remove
the six mounting bolts for torque converter from
drive plate through the service hole by rotating the
engine and remove the torque converter.
Installation Notice
31. Remove the transmission mounting bolts and
separate the transmission from the engine.
Installation Notice
30. Remove the exhaust manifold and exhaust pipe.
Installation Notice
32. Install a chain to the bracket of engine, by using
a hoist or crane.
33. Remove the engine mounting bracket nuts.
Installation Notice
Tightening Torque
Upper : 70 N•m (52 lb-ft)
Lower : 38 N•m (28 lb-ft)
•
Screw the six bolts mounting the torque
converter through the service hole by using a
mirror and rotating the engine.
Tightening Torque
42 N•m (31 lb-ft)
Tightening Torque
30 N•m (22 lb-ft)
Tightening Torque
54 - 68 N•m
(40 - 50 lb-ft)
KAA5A2N0
YAD1B180
YAD1B190
YAD1B200
M162 ENGINE MECHANICAL 1B1-9
SSANGYONG Y200
34. Carefully separate the engine assembly from the
vehicle.
35. Installation should follow the removal procedure
in the reverse order.
YAD1B210
SSANGYONG Y200
1B1-10 M162 ENGINE MECHANICAL
POLY V-BELT AND TENSIONING DEVICE
POLY V - BELT
Preceding Work : Removal of cooling fan
1 Poly V-belt
2 Belt Tensioning Pulley
YAD1B330
Removal & Installation Procedure
1. Release the belt tension by turning the belt
tensioning pulley nut clockwise.
Installation Notice
Tightening Torque
40.5 - 49.5 N•m
(29.9 - 36.5 lb-ft)
2. Remove the poly v-belt.
Notice: Check the belt for damage and tensioning
pulley bearing point for wear and replace them if
necessary.
3. Install the belt by turning the nut of tensioning
pulley clockwise.
YAD1B250
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст