SsangYong Rexton. Manual — part 385
DIESEL ENGINE MECHANICAL 1B3-115
SSANGYONG Y200
YAD1BC70
YAD1BC60
YAD1BC80
4. Remove the bolt and then remove the camshaft
sprocket.
Notice: During removal, be careful not to drop the
sprocket with chain. Remove the chain carefully
and then pull out the sprocket.
5. Remove the chain tensioner.
6. Remove the camshaft bearing cap bolts according
to the removal order.
Notice: Remove the camshaft bearing cap bolts
of 1 first and then remove the bolts of 2 one
revolution in stages until the counter-pressure is
r e leas e d. I n o rd er to a vo id d am a g ing t he
camshaft, it is essential to adhere to the removal
order for the camshaft bearing caps.
YAD1BC90
7. Remove the camshaft bearing cap.
8. Pull off the camshaft.
Notice: Be careful not to miss front locking
washer.
SSANGYONG Y200
1B3-116 DIESEL ENGINE MECHANICAL
YAD1BCM0
YAD1BCN0
YAD1BCP0
YAD1BCQ0
9. Pull out the locking washer.
Notice: Check the condition of locking washer and
replace if necessary.
Installation Procedure
1. Insert the locking washer.
2. Check the valve tappet and ensure that tappet
moves smoothly.
3. Coat the camshaft with oil and install the camshaft
onto the cylinder head so that the TDC marking
(arrow) is positioned upward vertically.
4. Install the camshaft bearing caps according to
markings(1, 2, 3 etc.).
5. Tighten the camshaft bearing cap bolts acccording
to installation order.
Installation Notice
Tighten the No. 1 bolts (light arrow) by one
revolution in stages first and then tighten the No.
2 bolts (dark arrow).
Tightening Torque
25 N•m (18 lb-ft)+ 90°
DIESEL ENGINE MECHANICAL 1B3-117
SSANGYONG Y200
YAD1BC30
YAD1BC70
YAD1BHJ0
6. Install the camshaft sprocket to be aligned the
markings of the camshaft / camshaft bearing cap
(arrow).
Notice: Align the alignment marks on the timing
chain and sprocket.
7. Tighten the camshaft sprocket bolt.
Installation Notice
Tightening Torque
25 N•m (18 lb-ft)+ 90°
Notice: If max. length ‘L’ of the 12-sided bolt
exceeds 53.6mm, replace it.
8. Install the chain tensioner.
Installation Notice
Replace the seal.
Before installation, by pumping in the oil approx.
10 times, fill the oil.
Tightening Torque
80 N•m (59 lb-ft)
YAD1BCS0
SSANGYONG Y200
1B3-118 DIESEL ENGINE MECHANICAL
YAD1BC40
YAD1BC10
9. Remove the engine lock 602 589 00 40 00.
10. Check the TDC marking of OT on the crankshaft.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст