SsangYong Rexton. Manual — part 119
DI10-81
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.4
Trouble Code and Symptom
Diagnosis Procedures
Barometric Sensor Malfunction
(Out of range, using strategy of
restoring by MAP sensor)
Low Signal
High Signal
Supply Voltage
Trouble Code
Symptom
P1107
P1108
P1105
Replace ECU
DI10-82
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.4
Not operatable.
Injector #1 resistance fault. Use estimate resis-
tance level.
Injector #2 resistance fault. Use estimate resis-
tance level.
Injector #4 resistance fault. Use estimate resis-
tance level.
Injector #5 resistance fault. Use estimate resis-
tance level.
Injector #3 resistance fault. Use estimate resis-
tance level.
Unable EGR control (Air Flow)
Unable RPC trim problem detection
Unable HP leak detection
Unable accelerometer learing strategy
MIL ON
Operating limited rail pressure mode
TBD
Trouble Code and Symptom
Battery Voltage Monitoring Signal
Malfunction
Low Signal
High Signal
Supply Voltage
Trouble Code
Symptom
P0562
P0563
P0560
DI10-83
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.4
Diagnosis Procedures
YES
YES
YES
YES
Key ON and check battery
voltage
Battery Problem?
Check battery wiring
NO
Battery Wiring Problem?
Check ECU wiring
NO
Wiring Problem?
Charge battery, check wiring
Charge battery, wiring problem
NO
Replace ECU
Charge
battery
Repair or
replace
Repair or
replace
Repair or
replace
NO
Check resistance of body
ground and ECU ground
High Resistance
YES
Repair ECU
ground
DI10-84
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.4
Trouble Code and Symptom
Diagnosis Procedures
1. Diagnosis Procedures (Boost Pressure)
Booster Pressure Sensor Malfunction
(Out of range with Key ON)
Low
High
Trouble Code
Symptom
P0109
P0106
Location demand=change the boost control to
O.L. mode at f (boost demand, engine cycling speed)
YES
Read DTC
Booster Pressure Problem?
Check air line malfunction:
* VGT/Turbo. * Air filter.
* Vacuum line. * Vacuum pump.
* Solenoid valve open.
* Vane condition.
* Air inlet valve function
NO
Repiar Completed
Refer to Diagnosis Tree “Check sensor(1)”
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст