SsangYong Rexton. Manual — part 360
SSANGYONG Y200
1B3-16 DIESEL ENGINE MECHANICAL
YAD1BAT0
YAD1BAU0
YAD1BAV0
YAD1BAW0
22. Disconnect the injection timing relay connector
from injection pump.
23. Disconnect the starter motor wires and necessary
connectors.
24. Disconnect the preheating time relay cable and
glow plug cable.
25. Disconnect the ground cable.
26. Disconnect the generator wires.
DIESEL ENGINE MECHANICAL 1B3-17
SSANGYONG Y200
YAD1BAX0
YAD1BAY0
YAD1BAZ0
YAD1BB00
27. Disconnect the engine coolant temperature sensor
connector.
28. Remove the automatic transmission oil cooler
lines.
Installation Notice
Use the new washer before installation of oil cooler
lines.
29. Remove the transmission mounting bolts and
separate the transmission from the engine.
Installation Notice
30. Remove the engine mounting bracket bolts.
Installation Notice
Tightening Torque
54 - 68 N•m
(40 - 50 lb-ft)
Tightening Torque
50 - 75 N•m
(37 - 55 lb-ft)
Tightening Torque
25 - 35 N•m
(18 - 26 lb-ft)
SSANGYONG Y200
1B3-18 DIESEL ENGINE MECHANICAL
YAD1BB10
31. Remove the engine assembly from the vehicle by
using a hoistor crane.
32. Installation should follow the removal procedure
in the reverse order.
DIESEL ENGINE MECHANICAL 1B3-19
SSANGYONG Y200
POLY V-BELT AND TENSIONING DEVICE
POLY V-BELT
1 Nut . . . . . . . . . . ... 21 N•m (15 lb-ft)
2 Tensioning Lever
3 Bolt
4 Spring
5 Tensioning Lever
6 Poly V-Belt
YAD1BB20
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст