SsangYong Actyon Sports II. Manual — part 133
07-4
Side View
Rear View
1. OVERVIEW
By using the planetary gear sets, two-gears shift type part time transfer case achieves direct connection
when selecting 4WD "HIGH" and 2.48 of reduction gear ratio when selecting 4WD "LOW". The silent
chain in transfer case transfers the output power to front wheels.
The simple operation of switches on instrument panel allows to shift between "2H" and "4H" easily while
driving (for 4L: stop vehicle first). The warning lamp warns the driver when the system is defective.
Front
Rear
07-5
3240-01
Operation
▶
Description
Mode
Conditions
Driving
mode
2H
2 Wheel drive
(rear wheel)
Rear-wheel drive mode. This is used under
normal or high-speed driving conditions on
public roads or highways.
4H
4 Wheel drive
(high speed)
This is used under sandy, muddy or snow-
covered road conditions
4L
4 Wheel drive
(low speed)
This is used for maximum traction.
When cornering with low speed in 4WD
condition, there could be tire dragging, some
mechanical shocks and resistances in
vehicle’s drive train. These are normal
conditions due to internal resistance in the drive
train when the 4WD system is properly working
Mode change
2H←4H
2 Wheel drive
↔4 Wheel drive
Shifting is possible while driving at the speed of
70 km/h or less
2H,
4H↔4L
2 Wheel drive,
4 Wheel drive (high
speed)
↔4 Wheel drive
(low speed)
For Automatic Transmission:
For Manual Transmission:
Stop the vehicle on level ground and
move the gear selector lever into the
“N” position. Turn the switch to the
desired position.
·
Stop the vehicle on level ground and
move the gear selector lever into the
“N” position. Then turn the switch to
the desired position while depressing the
clutch pedal.
·
To make the mode change easily, stop the
vehicle on level ground and turn the mode
switch to the desired position and move the
shift lever to "N"-"R"-"N" while depressing
the brake pedal.
07-6
2. LAYOUT
Front axle
Front locking hub system (IWE)
Front propeller shaft
DSI 6-speed automatic
transmission
Part-time transfer case
Rear propeller shaft
Rear axle
07-7
3240-01
1) Components Location
Magnet clutch power supply connector (for 1 pin)
Transfer case main connector
Shift motor connector
Rear propeller shaft
Oil filler plug
(Tightening torque: 19 ~ 30 Nm)
Transfer case assembly
Front propeller shaft
T/C motor
Oil drain plug
(Tightening torque: 19 ~ 30 Nm)
Damper
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст