SsangYong Actyon Sports II. Manual — part 130
02-19
3170-01
Reverse gear
02-20
3. SHIFTING MECHANISM
High-Force mechanism for
reverse gear shift
3rd/4th
1st/2nd
R
5th/6th
Neutral switch
Backup lamp switch
Control shaft
Control finger
Lug arrangement
04-3
3010-01
1. SPECIFICATION
Description
Specification
Operating type
Hydraulic type
Clutch pedal
Type
Suspended type
Max. operating travel
145 mm
Pedal free play (Longitudinal)
159 ± 5 mm
Pedal free play (Transverse)
5 ~ 15 mm
Clutch disc
Type
Dry type single diaphragm
Diameter of facing
Outer: Ø250 mm
Inner: Ø160 mm
Numbers of disc
2
Thickness of disc
Free: 8.7 ± 0.3 mm
When loaded: 8.0 ± 0.2 mm
Setting load of clutch cover assembly
At least 7,800 N
Clutch master
cylinder
Inner diameter
Ø17.46 mm
Concentric slave
cylinder
Maximum operating travel
Max. 20 mm
Operating pressure
Max. 2,200 N
Clutch fluid
Type
DOT 4
Capacity
As required
Stroke
5MT
30mm
6MT
27mm
04-4
1. OVERVIEW
The hydraulic clutch transmits the force required to operate the clutch pedal to the concentric slave
cylinder fitted to the clutch housing as a hydraulic pressure.
(The hydraulic pressure is transmitted in the following order: Clutch pedal - Clutch master cylinder -
Clutch pipe - Clutch damper - Clutch pipe and hose - Concentric slave cylinder - Pressure plate -
Flywheel.)
If a driver depress the clutch pedal, the hydraulic pressure is generated in the master cylinder. It is
transmitted to the concentric slave cylinder through the pipe, resulting in the cylinder being forced out. At
this time, the clutch disc is forced against the cylinder by pushing the cover. This, in turn, remove the
flywheel from the pressure plate. As a consequence, the power from the engine will be cut off and the
gear change can be carried out.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст