SsangYong Actyon Sports II. Manual — part 184
03-9
7410-01
Rear seat warmer switch
Rear seat
Rear seat
warmer switch
3-point seat belt
2-point seat belt
Seat belt buckle
Rear seat belts (3-point and 2-point)
03-10
3. HOW TO ADJUST AND OPERATE SEAT
1) Front Seat
There are two types of front seats: the power seat which uses the electric motor to adjust the seat
movement, seatback and seat cushion and
the manual seat which adjusts them by pulling the lever by hand.
For both power seat and manual seat, the driver can adjust the headrest and driver lumbar support by
hand.
The heated wires are inserted into the seatback and the seat cushion, which are operated by the front
seat warmer switch located to the center fascia.
To adjust headrest
▶
To adjust headrest height
To adjust the height of the headrest, raise or
lower it while pressing the headrest sleeve (A).
To adjust headrest tilting
Pull the headrest forwards and release to adjust
its tilting angle in 3 steps.
03-11
7410-01
Power Seat
To adjust seat slide
Moving the slide knob forward and rearward
activates the slide motor to move the seat forward
and rearward.
To adjust seatback
▶
Manual seat
To adjust seat slide
To move the seat forward or backward, pull and
hold the seat slide lever up and move the seat as
desired. Then, release the lever.
To adjust seat back angle
When moving the upper part of the recline knob
forward/backward, the seatback angle is adjusted
as the recline motor rotates the rail.
To adjust seat back angle
To change the seatback angle, lean forward
slightly and raise the lever. Then, lean back to the
desired angle and release the lever. After
adjusting, make sure the lever is returned to its
original position and the seatback is locked.
03-12
Power Seat
To adjust seat cushion angle
When moving the slide switch forward/backward,
the front and rear up/down motors rotate the rails
to move the front and rear side of the cushion
up/down.
Manual seat
To adjust seat cushion angle and
height
You can adjust the angle and height of the front or
rear section of the seat cushion by rotating the
adjustment knob on the side of the seat clockwise
or counterclockwise.
To adjust seat cushion height
When moving the slide switch up/down,
the front rear up/down motor rotates the rail to
move the whole seat cushion up/down.
To adjust driver seat lumbar support
When you raise and lower the lumbar support
lever on the power and manual seats, the lumbar
support goes in and out of the seat.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст