SsangYong Actyon Sports II. Manual — part 94
02-63
0000-00
Press "OK" button when the registration is complete.
7.
If the registration fails, press "Previous" button and perform the registration procedures again.
02-64
6) Pin Arrangement of Diagnostic Connector
Diagnosis connector is installed at the lower driver side instrument panel and it consists of 16 pins.
REKES key coding should be done using the diagnostic device.
▶Fuction For Each Terminal
Pin No.
Function
Pin No.
Function
1
-
9
Air bag
2
-
10
-
3
STICS "C1"
11
TCU(6AT)
4
Ground
12
SSPS Unit
5
Signal ground
13
TCCU
6
CAN - HIGH
14
CAN - LOW
7
GSL ECU
15
STICS "B21"
8
-
16
Battery +
The REKES key coding is not performed by connecting the REKES coding terminal (No. 15) of the
diagnostic connector to the jump wire between the ground terminals.
(possible only diagnostic device)
03-3
7010-06
ECU
REKES key
Diagnostic connector
1. SYSTEM CONFIGURATION
1) Components and Locations
Immobilizer warning lamp in instrument panel
Immobilizer unit
03-4
2) System Diagram
The certification for the immobilizer is performed when turning the ignition switch to the "ON" position after
the CAN communication between the ECU and immobilizer is established.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст