SsangYong Actyon Sports II. Manual — part 161
12-12
3) Pipe Lines
Hose assembly - pump to gear
Tube & hose assembly - return
Clamp - pipe
Nut - well
Screw
Bolt
Hose - return
Hose - return
Clamp - hose return
1.
2.
4.
5.
6.
7.
8.
9.
10.
12-13
4610-01
4. TROUBLESHOOTING
Problem
Possible Cause
Action
Movements of steering
feels heavy
Irregular wear or binding of steering ball joint due
to lack of lubrication or foreign material insertion
Lubricate or replace
Damaged or defective steering gear
Replace the steering
gear assembly
Incorrect steering pinion preload
Adjust
Defective steering shaft joint
Replace
leakage of steering fluid
Repair or replace
Insufficient steering fluid or air insertion
Fill up fluid or bleed air
Defective steering oil pump
Replace
Damaged or loosened pump drive belt
Adjust or replace
Clogging of fluid line
Repair or replace
Damaged wheel or tire
Repair or replace
Defective suspension
Repair or replace
Steering wheel pulls to
one side
Damaged steering linkage
Replace
Damaged wheel or tire
Repair or replace
Defective suspension
Repair or replace
Defective brake system
Repair or replace
Excessive free play of
steering wheel
Worn steering gear
Replace the steering
gear assembly
Worn or damaged steering ball joint
Replace
Looseness of steering gear box
Retighten
Poor returning of
steering wheel
Broken or binding of steering ball joint
Replace
Improper correct steering pinion preload
Replace the steering
gear assembly
Damaged wheel or tire
Repair or replace
Defective suspension
Repair or replace
12-14
Problem
Possible Cause
Action
Excessive vibration of
steering wheel (shimming)
Broken steering linkage
Replace
Looseness of steering gear box
Retighten
Broken or binding of steering ball joint
Replace
Worn or damaged front wheel bearing
Replace
Damaged wheel or tire
Repair or replace
Defective suspension
Repair or replace
Abnormal noise from
steering system
Looseness of steering gear box
Retighten
Defective steering gear
Replace the gear
assembly
Interference between steering column and
parts
Repair
Looseness of steering linkage
Retighten
Loosened or damaged oil pump drive belt
Adjust or replace
Looseness of oil pump bracket
Replace
Looseness of oil pump
Replace
Air insertion into system
Bleed air
Defective oil pump
Replace
Abnormal noise when
turning steering wheel
Looseness of steering column
Retighten
Worn or damaged steering shaft bearing
Replace the steering
column
Looseness of intermediate shaft
Retighten
Too heavy steering wheel
Worn or damaged steering shaft bearing
Replace the steering
column
12-15
4610-01
Adjusting Plug
Gear Preload Check
▶
Preload is the term used in mechanical engineering to describe the load applied to a fastener merely as
a result of being fastened (and before any external loads are applied)
5. INSPECTION AND MAINTENANCE
Place the wheels at straight ahead direction.
Lift up the vehicle with a lift.
Unscrew the adjusting plug lock nut.
Measure the torque of the adjusting plug.
1.
2.
3.
4.
If the torque is excessive or too low, adjust to
the specified torque.
5.
Place the rack gear to the center position.
Tighten the adjusting plug to 10.2 Nm.
Turn the pinion gear so that the rack gear is
turned to lock to lock 5 times.
Unscrew the adjusting plug.
Tighten the adjusting plug to 4.6 to 5.6 Nm.
Unscrew the adjusting plug to 67.5°.
-
-
-
-
-
-
Lock nut
Adjusting Plug
Bushing
Rack support yoke
Rack support spring
Yoke plug
Lock nut
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст