Isuzu Trooper (2000 year). Manual — part 14
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–25
10. Remove side defroster nozzle.
11. Remove center defroster nozzle.
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
1. Connect each duct and nozzle securely leaving no
clearance between them and making no improper
matching.
Center and / or Drive Side Vent
Center Vent, Drive Side Vent and Associated Parts
740RS003
Legend
(1) Center Vent
(2) Meter Cluster Assembly
(3) Lower Cluster Assembly
(4) Front Console Assembly
(5) Instrument Panel Driver Lower Cover
Assembly
(6) Side Vent
Removal
1. Disconnect the battery ground cable.
2. Remove front console assembly.
3. Remove lower cluster assembly.
4. Remove instrument panel driver lower cover
assembly.
5. Remove meter cluster assembly.
D
Refer to Instrument Panel Assembly in Body and
Accessories section.
6. Remove screws and the center vent from center
cluster while prying up the center vent catch portions.
7. Remove screws and the side vent from the center
cluster while prying up the vent catch portions.
Installation
To install, follow the removal steps in the reverse order.
1A–26 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Control Lever Assembly and / or Control Cable
Control Lever Assembly, Control Cable and Associated Parts
865RS011
Legend
(1) Instrument Panel Passenger Lower Cover
Assembly
(2) Glove Box
(3) Fan Switch and Air Conditioning Switch
Connector
(4) Temp Control Link Connection
(5) Control Cable
(6) Blower Assembly Connection
(7) Attaching Screws
(8) Control Lever Assembly
(9) Mode Control Link Connection
(10) Front Console Assembly
(11) Lower Cluster Assembly
(12) Instrument Panel Driver Lower Cover
Assembly
(13) Meter Cluster Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove front console assembly.
3. Remove lower cluster assembly.
4. Remove glove box.
5. Remove instrument panel passenger lower cover
assembly.
6. Remove instrument panel driver lower cover
assembly.
7. Remove meter cluster assembly.
D
Refer to Instrument Panel Assembly in Body and
Accessories section.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–27
8. Remove attaching screws.
D
Remove the four attaching screws.
865RS010
9. Pull the control lever assembly out and disconnect the
fan switch and air conditioning switch connectors.
865RS009
10. Remove control lever assembly.
11. Remove control cable.
Installation
To install, follow the removal steps in the reverse order,
noting the following points:
1. Adjust the control cable.
865RY00013
1A–28 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
D
Air source control cable.
1. Slide the control lever to the left (“CIRC”
position).
2. Connect the control cable at the “CIRC” position
of the link unit of the blower assembly and
secure it with the clip.
D
Temperature control cable.
1. Turn the control knob to the left (“MAX COLD”
position).
2. Connect the control cable at the “COLD”
position of the temperature control link of the
heater unit and secure it with the clip.
D
Air select control cable
1. Turn the control knob to the right (“DEFROST”
position).
2. Connect the control cable at the “DEFROST”
position of the mode control link of the heater
unit and secure it with the clip.
2. Check the control cable operation.
Control Panel Illumination Bulb
Control Panel Illumination Bulb and Associated Parts
865RS007
Legend
(1) Control Lever Assembly
(2) Bulb Socket
(3) Illumination Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove control lever assembly.
D
Refer to Control Lever Assembly in this section.
3. Pull out the bulb socket from the panel by turning it
counterclockwise.
4. Pull the illumination bulb from the socket.
Installation
To install, follow the removal steps in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст