Isuzu Trooper (2000 year). Manual — part 225
6E–29
TROOPER 6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
PIN
Refer To
ENG RUN
IGN ON
Wire Color
PIN Function
S77
5Volt Referrence (AP
Sensor 3)
ORN
5.0V
5.0V
Appropriate Sensor
S78
Accelerate Position(AP)
Sensor 2
YEL
0.41–0.45V
0.41–0.45V
General Description and
Operation,AP Sensor
S79
Accelerate Position(AP)
Sensor 3
BLU/GRN
4.55–4.99V
0.41–0.45V
General Description and
Operation,AP Sensor
S80
Manifold Absolute
Pressure(MAP)
BLU
0V
0V
General Description and
Operation, Manifold Absolute
Pressure
6E–30
TROOPER 6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
Component Locators
Engine Component Locator
060RY00070
6E–31
TROOPER 6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
Engine Component Locator Table
Number
Name
Location
1
Linear Exhaust Gas Recirculation (EGR) Valve
Rear right side of the engine
2
Throttle Position (TP) Sensor
On the throttle body
3
Intake Air Temperature (IAT) Sensor
On the intake air duct near the throttle body
4
Check Engine (MIL) Light
On the instrument panel beneath the
tachometer
5
Positive Crankcase Ventilation (PCV) Valve
On the left of the cylinder head cover
6
Air Cleaner
Left front of the engine bay
7
Mass Air Flow (MAF) Sensor
Attached to the air filter box
8
Camshaft Position (CMP) Sensor
On the rear right side of the left cylinder head
9
Fuel Pressure Regulator
Rear side of the engine
10
ION Sensing module
Bolted to the top of the Common Chamber
11
Common Chamber
Top of the engine
12
EVAP Canister Purge Valve
Bolted to the front of the coolant pipe
13
Fuse/Relay Box
Along the inside of the right fender
14
Manifold Absolute Pressure (MAP) Sensor
Bolted to the top of the Common Chamber
15
Throttle Body
Between the intake air duct and the Common
Chamber
16
Engine Coolant Temperature Sensor
On the coolant crossover pipe at the front of
the engine, near the throttle body
17
Power Train Control Module (PCM)
Along the inside of the right fender
6E–32
TROOPER 6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
Undercarriage Component Locator
F00RW032
Undercarriage Component Locator Table
Number
Name
Location
1
Fuel Pump Assembly
Installed in the top of the fuel tank
2
EVAP Canister
On the top of the bracket that is located behind
of the cross member
3
EVAP Canister Cut Valve
On the top of the bracket that is located behind
of the cross member
4
Fuel Gauge Unit
Installed in the front edge of the fuel tank, on
the right side
5
Fuel Filter
Located along the inside of the right frame rail,
ahead of the rear axle
6
Vehicle Speed Sensor (VSS)
2WD: Protrudes from the transmission
housing, just ahead of the propeller shaft.
4WD: Protrudes from the rear output shaft
housing of the transfer case.
7
Heated Oxygen Sensor (Bank 1, HO2S 1)
Threaded into the exhaust pipe behind the
right-hand catalytic converter
8
Heated Oxygen Sensor (Bank 1, HO2S 2)
Threaded into the exhaust pipe ahead of the
right-hand catalytic converter
9
Heated Oxygen Sensor (Bank 2, HO2S 1)
Threaded into the exhaust pipe ahead the
left-hand catalytic converter
10
Heated Oxygen Sensor (Bank 2, HO2S 2)
Threaded into the exhaust pipe behind the
left-hand catalytic converter
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст