Isuzu Trooper (2000 year). Manual — part 430
MANUAL TRANSMISSION
7B–49
2. Install the reverse shift rod from the rear side by
pushing the ball on using a screwdriver.
226RW126
21. Install the reverse-5th shift rod.
1. Install the reverse shift arm No.1 lock ball to the
reverse shift arm No.1.
2. Install the interlock pin to the intermediate plate.
226RW039
3. Put in the reverse-5th shift rod from the front.
226RW011
4. Using a screwdriver and a hammer, install the 2
new shift rod snap rings to the 5th-reverse shift
rod and reverse shift rod.
226RW037
7B–50 MANUAL TRANSMISSION
22. Install 1st–2nd shift rod.
1. Install the interlock pin to the intermediate plate.
226RW042
2. Put in the 1st–2nd shift rod from the rear.
226RW044
23. Install 3rd–4th shift rod.
1. Install the straight pin and interlock pin to the
intermediate plate.
226RW043
2. Put in the 3rd–4th shift rod from the rear.
226RW046
MANUAL TRANSMISSION
7B–51
24. Install the interlock parts.
1. Using a screwdriver and hammer, 2 new shift rod
snap rings to the 1st–2nd and 3rd–4th shift rod.
226RW051
2. Install the 3 shift detent ball and springs to the
intermediate plate.
226RW049
3. Clean up the plug hole.
4. Apply sealant to the plug threads.
sealant: three bond 1344 or equivalent
5. Using a torx socket wrench(T40) install and
torque the 4 plugs.
Torque: 18.5 N·m (13.5 lb ft)
226RW050
25. Install mainshaft assembly.
NOTE: Coat all parts with gear oil before installing them.
1. Using a plastic hammer, tap the 5th-reverse shift
rod at the reverse shift.
226RW180
7B–52 MANUAL TRANSMISSION
2. Install the shift arm No.1 and No.2 to the
mainshaft.
226RW010
3. Using a plastic hammer, tap the intermediate
plate and install the mainshaft. Through the shift
arm No.1 and No.2 to the shift rod.
226RW009
4. Using a snap ring expander, install the snap ring.
226RW035
5. Using a plastic hammer, tap the 5th-reverse shift
rod at the neutral shift.
226RW008
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст