Isuzu Trooper (2000 year). Manual — part 47
2A–18
POWER ASSISTED SYSTEM
Main Data and Specifications
General Specification
Caster
2
°
10’
±
45’
Camber
0
°
±
30’
King pin inclination
12
°
30’
±
30’
Toe-in
0
±
2 mm (0
±
0.08 in)
Max. steering angle
inside
34
°
(+0
°
to –2
°
)
outside
32
°
Torque Specification
E03RS001
POWER ASSISTED SYSTEM
2A–19
Special Tools
ILLUSTRATION
TOOL NO.
TOOL NAME
J–29877–A
Tester:
Power steering
J–39213
Adapter:
Power steering tester
J–29107
Remover:
Pitman arm
J–26508
Installer:
Extension housing oil
seal
2A–20
POWER ASSISTED SYSTEM
Power Steering Gear
Power Steering Gear and Associated Parts
431RS002
Legend
(1) Pipe
(2) Universal Joint Bolt
(3) Pitman Arm
(4) Nut
(5) Gear Box Mounting Bolt and Nut
(6) Gear Box
Removal
1. Remove the stone guard.
2. Remove the lower fan shroud. Refer to Radiator in
Engine section.
3. Disconnect stabilizer bar at the stabilizer links.
Loosen stabilizer bracket fixing nuts.
4. Remove pipe.
5. Remove nut.
6. Use Pitman arm remover J–29107 to remove pitman
arm.
433RS005
POWER ASSISTED SYSTEM
2A–21
7. Make a setting mark(1) across the coupling flange
and worm shaft to ensure reassembly of the parts in
the original position, then remove universal joint bolt.
431RW004
8. Push the stabilizer bar aside and remove the gear box
mounting bolts and nuts.
431RS004
9. Remove gear box.
Installation
1. Align the setting marks(1) made at removal, then
install gear box.
431RW004
2. Tighten gear box mounting bolt and nut to specified
torque.
Torque: 44 N·m (33 lb ft)
3. Tighten gear universal joint bolt to specified torque.
Torque: 25 N·m (18 lb ft)
4. Align the notched tooth and install pitman arm.
433RS006
5. Install nut and tighten Nut to specified torque.
Torque: 216 N·m (159 lb ft)
6. Install Pipe and tighten to specified torque.
Torque: 44 N·m (33 lb ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст