Isuzu engine C22NE / 22LE / 20LE. Manual — part 123
6F-14 ENGINE EXHAUST
Installation
1. Place new gaskets on the converter front and rear pipes,
and connect the converter to the exhaust pipes.
Note:
When placing new gaskets, check that “U” mark on the
gasket is upside.
2. Tighten the bolts with the specified torque.
3. Reinstall the bracket bolts and tighten them.
ENGINE EXHAUST 6F-15
Exhaust Silencer
Exhaust Silencer and Associated Parts
Legend
1. Exhaust Silencer Fixing Bolts
2. Exhaust Silencer
Removal
1. Disconnect battery ground cable.
2. Raise the vehicle and support with suitable safety stands.
3. Remove four exhaust silencer fixing bolts (1) and two rear
exhaust pipe fixing bolts and nuts (2) then disconnect rear
exhaust silencer from rear exhaust pipe
4. Remove exhaust silencer mounting rubbers from chassis
side then remove exhaust silencer.
6F-16 ENGINE EXHAUST
Installation
1. Install the exhaust silencer and tighten two bolts and nuts
(2) on rear exhaust pipe to specified torque then tighten four
bolts (1) on Catalytic Converter to specified torque.
Torque:
Bolts: 43 N
⋅
m (4.4 kgf
⋅
m)
ENGINE EXHAUST 6F-17
Rear Exhaust pipe
Rear Exhaust pipe and Associated Parts
Legend
1 Gasket
2 Mounting Rubber
3 Rear Exhaust Pipe
Removal
1. Disconnect battery ground cable
2. Raise the vehicle and support with suitable safety stands.
3. Remove rear exhaust pipe fixing bolts and nuts, then
disconnect rear exhaust pipe (3) from exhaust silencer.
4. Remove mounting rubber (2).
5. Remove rear exhaust pipe (3).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст