Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 2022
WHEELS AND TIRES 3E-13
DISASSEMBLY
C22, C20 Series Engine Model
4 x 4 model
4 x 2 model
1
3
2
1a
2a
4
3a
4a
3E-14 WHEELS AND TIRES
4J Series, 6VD1 Engine Model
Disassembly Steps
(for 4
×××× 2 model)
1. Wheel cap
2. Wheel nut
3. Wheel and tire assembly
4. Tire assembly
(for 4
×××× 4 model)
1a. Wheel nut
2a. Center cap
3a. Wheel and tire assembly
4a. Tire assembly
WHEELS AND TIRES 3E-15
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear, damage or any other abnormal conditions are found
through inspection.
Visual Check
Inspect all disassembled parts for wear, damage or other
abnormal conditions.
Measure Wheel Runout
mm(in)
14 inch
Less than 1.2 (0.047)
15 inch, 16inch
Less than 1.5 (0.059)
If the measured value exceed the specified limit, the wheel
must be replaced.
Measure Wheel Unbalance
Using a wheel balancing equipment.
Install on the side rim of the wheel a balance weight to offset
unbalance.
Balance weight for the wheel should not exceed 170g in total,
and 140g is the maximum amount for either side.
3E-16 WHEELS AND TIRES
REASSEMBLY
C22, C20 Series Engine Model
4 x 4 model
4 x 2 model
4
2
3
4a
3a
1
2a
1a
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст