Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 327

AUTOMATIC TRANSMISSION (AW30-40LE) 7A-157

240RY00016

7. Check valve, spring

Install new check valve and spring.

240RY00017

8. Valve body

Align the groove of the manual valve to the pin of the
lever.

244R200078

Install the twenty bolts.
NOTE:
Each bolt length (mm) is indicated in the figure.
Torque: 10 N････m (1.0 kg････m/87 Ib････in)

249RY00011

9. Solenoid wiring

Coat a new O-ring with ATF, and install it to the
solenoid wiring.
Insert the solenoid wiring to the case and install the
stopper plate.
Connect the connectors to the solenoid S1 (1), S2 (2),
lock-up solenoid (3), and pressure control solenoid (4).

249RY00012

7A-158 AUTOMATIC TRANSMISSION (AW30-40LE)

UBS and TFR/S

244RY00002

10. Oil strainer assembly

Install a new oil strainer assembly with gaskets.

UBS and TFR/S

244RY00003

Install the oil strainer with the gaskets to the valve
body. Tighten the four (UBS and TFR/S) or three (’01
TFR) bolts.
Torque: 10 N････m (1.0 kg････m/87 Ib････in)

’01 TFR

244L100001

240RY00019

11. Oil pan

Install two magnets in oil pan.
Remove any gasket material and be careful not to drop
oil on the contacting surfaces of the transmission case
and oil pan.
Apply liquid gasket (TB1281 or its equivalent) to the oil
pan as shown in the figure.
NOTE:
Install the oil pan as soon as the seal gasket is
applied.

AUTOMATIC TRANSMISSION (AW30-40LE) 7A-159

240RY00020

Install and tighten the nineteen bolts.
Torque: 7.4 N････m (0.75 kg････m/65 Ib････in)

7A-160 AUTOMATIC TRANSMISSION (AW30-40LE)

DISASSEMBLY OF MAJOR

COMPONENTS (3)

248L100001