Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1029
10-18 CAB
17.Window Glass
•
Remove 2 screws through the access hole and pull out
the window glass upward.
18.Window Regulator/Power Window Motor
•
Disconnect the power window motor connector.
19.Glass Run
•
Pull it out of the door piller of the channel. (front/rear)
20.Glass Run Rear Channel
•
Remove 2 screws.
21.Inside Lever
22.Door Lock Assembly/Door Lock Actuator
•
Disconnect the linkage with the outside handle, the
inside lever and the lock cylinder.
23.Glass Run Front Channel
24.Door Lock Cylinder
•
Remove the door lock cylinder by applying finger
pressure from inside while depressing the retaining clip.
25.Outside Handle
CAB 10-19
DISASSEMBLY AND REASSEMBLY
(Rear Door)
3
2
9
10
18
12
19
13
17
16
15
14
6
5
4
1
6
11
7
6
8
Disassembly Steps
▲
1.Power window switch/Window regurator
handle
2. Speaker grill
3. Speaker
▲
4. Bezel
5. Inside pull handole
▲
6. Door trim pad
7. Arm rest sm
8. Bracket
9. Water proof sheet
10. Glass guide
11. Upper cover
▲
12. Window regurator/Power window motor
▲
13. Window glass
14. Bracket
15. Inside lever
16. Outside handle
▲
17. Door lock cylinder
18. Outer waste seal
19. Glass run
Reassembly Steps
To reassemble, follow the disassembly steps
in the reverse order.
10-20 CAB
Important Operations
1. Window Regulator Handle
•
To remove the regulator handle, remove the clip at the
root of the handle by using wire.
4. Bezel
•
Remove the screw while pulling the inside lever toward
you.
6. Door Trim Pad
•
Remove the cover bottom of the trim pad (4 pcs), then
remove the screws.
12.Window Regulator
•
Remove the 4 screws holding the regulator.
CAB 10-21
13.Window Glass
•
First, align the height of regulator to the access hole.
Remove 2 screws attaching bottom channel and
regulator, then remove the glass.
•
Remove the window glass by tilting it as necessary.
17.Door Lock Assembly
•
Disconnect the linkage from the door outside handle,
inside lever and lock cylinder.
Remove the 2 bolts holding the outside handle from
inner side.
•
Remove the 3 bolts holding the door lock assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст