Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 2004
FRONT SUSPENSION 3C-9
4
××××4 Model and TFR25
N
⋅m (kgf⋅m/lb⋅ft)
82.4
±7.8 (8.4±0.8/60.8±5.8)
9.8 (1.0/7.2)
40.2
±5.9 (4.1±0.6/29.7±4.3)
19.6
±4.9 (2.0±0.5/14.5±3.6)
27.5
±6.9 (2.8±0.7/20.3±5.1)
3C-10 FRONT SUSPENSION
FRONT SUSPENSION
GENERAL DESCRIPTION
4
××××2 Model (except TFR25)
FRONT SUSPENSION 3C-11
4
××××4 Model and TFR25
4
××××4 Model
TFR25
The links attach to the vehicle with bolts and bushings at their inner pivot points and to the steering knuckle, which
is part of the front wheel spindle, at their outer points.
The knuckle is mounted to the upper and lower links each of which has a ball joint to permit pivoting of the knuckle
for steering operations. The hub is supported in position on the knuckle spindle by means of the two bearings and
the rotor is mounted to the hub.
The front suspension is an independent type utilizing torsion bar springs. The torsion bar spring has splines on
each end. Height control is provided on the third crossmember. Both the upper and lower links are pressed steel
and the torsion bar is supported at the ends by lower link in front and by height control arm in rear.
3C-12 FRONT SUSPENSION
TORSION BAR, STRUT BAR, STABILIZER BAR
AND SHOCK ABSORBER (4
××××2 MODEL EXCEPT TFR25)
DISASSEMBLY
Disassembly Steps
Torsion Bar
! 1. Adjust bolt, seat, lock plate
and bolt
! 2. Height control arm
! 3. Torsion bar
Strut Bar
4. Nut and washer
5. Rubber bushing and washer
6. Bolt and washer
7. Strut bar
8. Rubber bushing, washer and
tube
Stabilizer Bar
9. Bolt
10. Bracket
11. Nut
12. Rubber bushing and washer
13. Rubber bushing and washer
14. Bracket
15. Bolt and nut
16. Rubber bushing and washer
17. Stabilizer bar
Shock Absorber
18. Nut
19. Rubber bushing and washer
20. Bolt, nut, and washer
!21. Shock absorber
22. Rubber bushing and washer
23. Lower link bumper
24. Upper link bumper
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст