Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 273
11. See the programming result.
Tech-2 displays the result of programming as the following.
Follow those instructions.
Selected Programming is not possible due to wrong System Status!
Immobilizer
Not
Programmed!
Immobilizer Already Programmed!
ECM Not Programmed!
ECM Already Programmed!
12. Transponder key must be reprogrammed, because all transponder information is erased.
when ICU is programmed. See Transponder programming.
l Program ECM
1.
Procedure is the same as program ICU procedure steps 1 through 5.
6.
Turn on the Ignition.
7.
Select an Engine system.
8.
See the display of programming result.
l Program ICU / ECM
Caution
1) Do not replace ICU and ECM at the same time
2)Change ICU at first or ECM and other one change follows.
Follow Program ICU steps 1 through 6, procedure is the same as program ECM procedure
steps 1 through 6.
7.
Input the security code.
8. Enter
VIN
9.
Enter Key No.
10.
Select an engine system.
See programming result display and follow instructions of the display.
11.
Transponder key must be reprogrammed, because all transponder information on ICU is
Erased when ICU is programmed. See Transponder programming.
12.
Follow program ECM steps 1 through 8.
Important
After successful programming, the engine control can only be used for vehicles with immobilizer
and transponder. Faults that occur in connection with the immobilizer control unit are recognized
by the engine control unit and as long as “IMMOBILOZER” is not programmed, are indicated by a
flashing of the engine check lamp.
If the immobilizer and engine control unit are replaced at the same time, the immobilizer control
unit must be programmed first before the “IMMOBILIZER” function in the engine control unit can be
activated.
Loss of car pass
If the car pass is lost, the data can be requested from your proper organization name. This
request will only be processed if accompanied by the enclosed form and proof of ownership.
Once the data is received, it can be entered in a blank car pass and given to the customer. The
unused car pass should be destroyed.
l Instructions on Filling Out the form "Data request, car pass"
To be provided by the dealership
The data requested under items 1-10 must be provided completely, including the authorized
dealership number, the vehicle Identification number(VIN) and engine type/number (Engine type/No)
Mark missing data / desired data with a cross:
19. Security code (for diagnosis and programming with Tech-2)
20. Mechanical key Number
Complete the form by entering the data and signature/authorized dealership stamp and
send it along with proof of ownership(Vehicle lD or invoice) to address provided in the
form. The requested data will be sent by Fax to the dealership that made the request
after your organization has confirmed that the info is corrected.
Important Instructions:
Only data corresponding to the delivery status of the vehicle can be issued. Car pass
data requests will only be processed if the first column is filled out completely. signed
and sent to your organization along with proof of ownership.
Information via telephone is only possible in exceptional circumstances via your service
organization.
As for the delivery of new vehicles, the customer must be informed about all features of the
car pass that are relevant to vehicle security, for example, that the car pass should be kept
in a safe place(not in the vehicle) and should be presented when an authorized your
organization name workshop is visited, The exact phrasing can be found in the relevant
Owner's Manual.
Data Request
Car Pass
Your organization name
To be filled out by authorized dealership:
Comment, plant security
1. Dealership name
2. Name of contact partner
3. Dealership number
4. Address
5. Tel: Fax
6. Name of registered keeper
7. Reason for request (please mark with cross)
- Loss by customer
- Loss by dealership
- New delivery Car Pass
- Theft
8. Vehicle type
9. VIN
10. Engine type / No
Requested data (please mark with cross)
11. Security Code :
12. Key No. :
13. Radio code (if lost, please supply
radio unit number)
14. CD-changer code (if lost, please
supply CD-changer unit number)
Important Instructions:
Only data corresponding to the delivery status of the vehicle Ex works can be Issued.
Car pass requests will only be processed if they are filled out completely, signed and sent to
your organization along with proof of ownership (enclosure).
Information via telephone is only possible in exceptional circumstances via your service organization.
Comments form Plant Security
No signature Data / proof of ownership incomplete,
Please complete
Data / proof of ownership missing, Illegible due to poor fax communication,
Please supply please resend
Data, signature / stamp Data, signature
(Dealership) (Plant Security)
Enclosure : Proof of ownership
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст