Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 623
00 – 6 SERVICE INFORMATION
FLUID CONDITION
FLUID CONDITION
NORMAL*
CONTAMINATED
COLOR
RED
BROWN
NON-TRANSPARENT
BROWN
OR LIGHT BROWN
/PINK
DRAIN
NO
YES
YES
YES
REQUIRED?
CONTAMI-
NONE
NATION
Very small amount
of foreign material
in bottom of pan
CORRECT
LEVEL
&
CONDITION
Contamination by
coolant or other
source
Large pieces of
metal or other
foreign material in
bottom of pan
– Remove both pans
– Change filter
– Flush cooler
– Add new fluid
– Check level
1. LOW LEVEL:
A. Add fluid to
obtain proper
level & check
for external
leaks.
B. Correct cause
of leak.
2. HIGH LEVEL:
–
Remove excess
fluid
– Repair/replace
radiator cooler
– Transmission
overhaul required
– Check for:
•
Damaged plates
and seals
•
Contaminated
solenoids
– Flush cooler
– Add new fluid
– Check level
– Transmission
overhaul required
– Flush cooler and
cooler lines
– Add new fluid
– Check level
* Fluid should be changed according to maintenance schedule.
SERVICE INFORMATION 00 – 7
CHANGING TRANSMISSION FLUID
There is no need to change the transmission fluid unless
the transmission is used under one or more of the
following heavy duty conditions.
A: Repeated short trips
B: Driving on rough roads
C: Driving on dusty roads
D: Towing a trailer
If the vehicle is used under these conditions, change the
fluid every 27,000 miles (45,000 km.)
1.
Place a large drain pan under the oil pan.
2.
Remove the transmission oil drain screw and drain
fluid.
3.
Tighten drain screw.
Drain Screw Torque
N·m(kg·m/lb·ft)
38 (3.9 / 28)
4.
Remove the transmission overfill screw and fill
transmission through overfill screw opening, using
DEXRON®-III ATF.
5.
Let engine idle until a fluid temperature between 32°C
(90°F) and 57°C (135°F) is reached, then close the
overfill screw.
Overfill Screw Torque
N·m(kg·m/lb·ft)
38 (3.9 / 28)
6.
Add transmission fluid until it flows out over the
overfill screw opening.
NOTE:
Transmission fluid temperature to be check with
service tool.
Overfill screw
Drain screw
242RT001
00 – 8 SERVICE INFORMATION
FIXING TORQUE
AUTOMATIC TRANSMISSION
N·m (kg·m / lb·ft)
E07LW003
★
★ Non-reusable part
63(6.4/40)
See page 7A1-153
54(5.5/40)
55(5.6/41)
50(5.1/37)
40(4.1/30)
43(4.4/32)
67(6.8/49)
41(4.2/30)
8(80kg•cm/69 lb in)
6(60kg
・cm/52 lb in)
SERVICE INFORMATION 00 – 9
FIXING TORQUE (CONT.)
AUTOMATIC TRANSMISSION
N·m (kg·m / lb·ft)
E07LW001
鈴木
'97/ 11/ 28
修
発注者
受注番号
発注日
希望納期
10012
作業番号
13(130kg·cm/113 lb.in)
23(2.3/17)
25(2.5/18)
20(2.0/15)
11(110kg·cm/96 lb.in)
38(3.9/28)
20(2.0/15)
20(2.0/15)
11(110kg·cm/96 lb.in)
13(130kg·cm/113 lb.in)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст