Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1550
8-300 ELECTRICAL-BODY AND CHASSIS
REMOVAL AND INSTALLATION
DRIVER SEAT SIDE POWER WINDOW &
DOOR LOCK SWITCH
(2 DOORS MODEL)
Removal
1. Remove the switch by pushing the spring with the tip of a
screwdriver.
2. Disconnect the connector.
Installation
To install, follow the removal steps in the reverse order.
FRONT PASSENGER’S POWER WINDOW
& DOOR LOCK SWITCH
(2 DOORS MODEL)
Removal
1. Remove the switch by pushing the spring with the tip of a
screwdriver.
2. Disconnect the connector.
Installation
To install, follow the removal steps in the reverse order.
ELECTRICAL-BODY AND CHASSIS 8-301
DRIVER SEAT SIDE POWER WINDOW &
DOOR LOCK SWITCH
(4 DOORS MODEL)
Removal
1. Remove the switch by pushing the spring with the tip of a
screwdriver.
2. Disconnect the connector.
Installation
To install, follow the removal steps in the reverse order.
FRONT PASSENGER’S POWER WINDOW
& DOOR LOCK SWITCH
(4 DOORS MODEL)
Removal
1. Remove the switch by pushing the spring with the tip of a
screwdriver.
2. Disconnect the connector.
Installation
To install, follow the removal steps in the reverse order.
REAR POWER WINDOW & DOOR LOCK
SWITCH-LH & RH
Removal
1. Remove the switch by pushing the spring with the tip of a
screwdriver.
2. Disconnect the connector.
Installation
To install, follow the removal steps in the reverse order.
8-302 ELECTRICAL-BODY AND CHASSIS
DRIVER SEAT SIDE POWER WINDOW
MOTOR
Removal
1.Window Regulator ASM
• Refer to the removal steps of the WINDOW
REGULATOR/POWER WINDOW MOTOR in Section
10 “BODY”.
2.Power Window Motor
• Loosen the fixing bolts to remove the power window
motor from the regulator.
Installation
To install, follow the removal steps in the reverse order.
FRONT PASSENGER’S POWER WINDOW
MOTOR
Removal
1. Window Regulator ASM
• Refer to the removal steps of the WINDOW
REGULATOR/POWER WINDOW MOTOR in Section
10 “BODY”.
2. Power Window Motor
• Loosen the fixing bolts to remove the power window
motor from the regulator.
Installation
To install, follow the removal steps in the reverse order.
REAR POWER WINDOW MOTOR-LH & RH
Removal and Installation
Refer to the “DRIVER SEAT SIDE POWER WINDOW
MOTOR” removal and installation steps in this section.
ELECTRICAL-BODY AND CHASSIS 8-303
INSPECTION AND REPAIR
Power Window Relay
Check continuity between the relay terminals.
1
-
5
. . . . . . No continuity
(When battery voltage is applied between
2
and
4
)
1
-
5
. . . . . . Continuity
Harness side
Driver Seat Side Power Window & Door Lock
Switch
1.Harness Side Connector Circuit
Disconnect the switch connector, and check voltage and
continuity between the harness side connector terminals as
shown in the following table.
Terminal
No.
Wire
color
Connecting to
Check item
Connecting
terminal
Check condition
Standard
2
G/R
Power window
relay
Voltage
2-Ground
Starter SW “ON”
Approx.
12V
1
L/R
Power window
10
L/W
motor
5
B
Ground
Continuity
5-Ground
-
Continuity
Harness side
Front Passenger’s Power Window & Door Lock
Switch
1.Harness Side Connector Circuit
Disconnect the switch connector, and check voltage and
continuity between the harness side connector terminals as
shown in the following table.
Continuity
-
1-10
Continuity
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст