Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 336
AUTOMATIC TRANSMISSION (AW30-40LE) 7A-193
252RY00029
Check OD direct clutch piston
Check that the check ball is free by shaking the piston.
Check that the valve does not leak by applying low-
pressure compressed air.
252L100009
Check OD direct clutch drum bushings
Using a dial indicator, measure the inside diameter of
the OD direct clutch drum bushings.
Maximum inside diameter: 27.11 mm (1.0673 in)
If the inside diameter is greater than the maximum,
replace the OD direct clutch drum.
252RY00031
Check OD planetary gear bushing
Using a dial indicator, measure the inside diameter of
replace the OD planetary gear bushing.
Maximum inside diameter: 11.27 mm (0.4437 in)
If the inside diameter is greater than the maximum,
replace the OD planetary gear.
7A-194 AUTOMATIC TRANSMISSION (AW30-40LE)
REASSEMBLY
252R200008
Reassembly steps
1. OD planetary gear assembly
2. Thrust
washer
3. OD one-way clutch
4. Retaining
plate
5. Snap
ring
6. Race
7. OD planetary ring gear
8. Ring gear flange
9. Snap
ring
10. Thrust bearing
11. O-ring
12. OD direct clutch piston with O-ring
13. Piston return spring
14. Snap ring
15. Flange, disc and plate
16. Snap ring
17. Thrust bearing
18. OD direct clutch assembly
AUTOMATIC TRANSMISSION (AW30-40LE) 7A-195
252RY00032
Reassembly steps
1. OD planetary gear assembly
2. Thrust washer
Install the thrust washer to the OD planetary gear,
facing the grooved side upward.
252RY00033
3. OD one-way clutch
Install the one-way clutch into the outer race, with the
flanged side of the one-way clutch facing upward.
252RY00026
Install OD one-way clutch with outer race to overdrive
planetary gear.
252RY00024
4. Retaining plate
5. Snap ring
Install retaining plate, then install snap ring, using a
screwdriver.
6. Race
Coat the race with petroleum jelly and install it to the
planetary gear.
Race diameter (Reference)
Inside diameter
24.7 mm (0.972 in)
Outside diameter
41.8 mm (1.646 in)
252RY00034
7A-196 AUTOMATIC TRANSMISSION (AW30-40LE)
252RY00023
7. OD planetary ring gear
8. Ring gear flange
Install ring gear flange to OD planetary ring gear.
252RY00022
9. Snap ring
Install snap ring, using a screwdriver.
10. Thrust bearing
Coat the race and bearing with petroleum jelly and
install them onto the OD planetary ring gear.
Race and bearing diameter (Reference)
Inside
Outside
Bearing
and race
24.2 mm (0.953 in) 47.8 mm (1.882 in)
252RY00035
252L100011
11. O-ring
Coat new O-rings with ATF and install them on the OD
direct clutch piston.
12. OD direct clutch piston with O-ring
Being careful not to damage the O-rings, press in the
OD direct clutch piston into the clutch drum, using both
hands.
252L100012
13. Piston return spring
Install piston return spring.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст