Isuzu Rodeo UE. Manual — part 531
LIGHTING SYSTEM
8A–11
Spotlight Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (2).
3. Remove the bulb (1).
f
Pull out the bulb.
825RW105
Installation
To install, follow the removal steps in the reverse order.
Luggage Room Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (2).
3. Remove the bulb (1).
f
Pull out the bulb.
825RW077
Installation
To install, follow the removal steps in the reverse order.
8A–12
LIGHTING SYSTEM
HVAC Bezel Illumination Light Bulb
Removal and Installation
Refer to Control Panel Illumination bulb in Heating,
Ventilation and Air Conditioning (HVAC) section.
Shift Lever Illumination Light Bulb (A/T)
Removal
1. Disconnect the battery ground cable.
2. Remove the console assembly.
f
Remove four screws.
3. Remove the bulb (1).
f
Turn the bulb socket counterclockwise.
f
Pull out the bulb from the socket.
825RW078
Installation
To install, follow the removal steps in the reverse order.
LIGHTING SYSTEM
8A–13
Vanity Mirror Illumination Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (1).
3. Remove the bulb (2).
f
Attach some scotch tape to the bulb and pull it out.
743RW005
Installation
To install, follow the removal steps in the reverse order.
Starter Switch
Removal and Installation
Refer to Lock cylinder in steering section.
8A–14
LIGHTING SYSTEM
Lighting Switch (Combination Switch)
Removal and Installation
Refer to Combination Switch in Steering section.
Dimmer·Passing Switch (Combination Switch)
Removal and Installation
Refer to Combination Switch in Steering section.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст