Isuzu KB P190. Manual — part 1460
10-82 CAB
REMOVAL AND INSTALLATION
(REAR CENTER SEAT BELT/REAR SEAT BELT BACKLE)
RTW3A0LF000901
Removal Steps
1.
Nut
2. Rear seat belt buckle
▲ 3. Cover
▲ 4. Rear end trim cover
5.
Bolt
6. Rear center seat belt
Installation Steps
▲ 6. Rear center seat belt
▲ 5. Bolt
4. Rear end trim cover
3.
Cover
2. Rear seat belt buckle
▲ 1. Nut
CAB 10-83
RTW3A0SH000601
Important Operations - Removal
3. Cover
• Pry the lower portion of the cover and remove it.
4. Rear End Trim Cover
• Refer to Interior Trim Panels in this section.
RTW3A0SH001601
Important Operations - Installation
6. Rear Center Seat Belt
• Install the seat belt webbing through the through ring on
the back panel as shown in the illustration.
5. Bolt: Rear Center Seat Belt to Floor Panel
Torque N
⋅m (kgf⋅m/lb⋅ft)
40 (4.1 / 30)
1. Nut: Rear Seat Assembly/Rear Seat Belt Buckle to Floor
Panel
Torque N
⋅m (kgf⋅m/lb⋅ft)
40 (4.1 / 30)
10-84 CAB
REAR SEAT BELT (EXTEND CAB)
REMOVAL AND INSTALLATION
(TONGUE SIDE SEAT BELT)
RTW3A0MF000701
Removal Steps
▲ 1. Body side rear lower trim cover
2. Lower anchor bolt
▲ 3. Upper anchor bolt
4. Retractor fixing bolt
Installation Steps
▲ 4. Retractor fixing bolt
▲ 3. Upper anchor bolt
▲ 2. Lower anchor bolt
1. Body side rear lower trim cover
CAB 10-85
Important Operations - Removal
1. Body Side Rear Lower Trim Cover
• Refer to Interior Trim Panels in this section.
RTW3A0SH000301
3. Upper anchor bolt
• Open the through ring anchor cover and remove the
seat belt upper anchor bolt
Important Operations - Installation
4. Retractor Fixing Bolt
Bolt torque
N
⋅m (kgf⋅m/lb⋅ft)
40 (4.1 / 30)
3. Upper Anchor Bolt
Bolt torque
N
⋅m (kgf⋅m/lb⋅ft)
40 (4.1 / 30)
2. Lower Anchor Bolt
Bolt torque
N
⋅m (kgf⋅m/lb⋅ft)
40 (4.1 / 30)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст